Thanks, Still I m bit confused. If I configure dial plan than it means My sipx site 2 should be on the static ip address. Will it work fine if Nat is in b/w the 2 Sites. Should i Have to specify 5060 port in gatway registration.
Regards, Vikas On Wed, Jun 18, 2008 at 5:18 PM, Tony Graziano <[EMAIL PROTECTED]> wrote: > I do this with a custom dialplan. > > It depends on whether you want the dialing to be "native" or "prefixed". > This is based ona 3 digit dialplan. > > Site 1 - Extensions 200-299 > Site 2 - Extensions 300-399 > > Create a gateway with the IP of site 2's IP address. > Create a rule at site 1, CUSTOM, prefix 3 and 2 digits. Resulting call > entire dialed number, use gateway just created. > > Do the same thing at site 2, prefix 2 and 3 digits. Similarly you can > create a rule to prefix "8" so you can transfer to VM on the other > system, etc. > > IF both sites are in the same range (200-299) then it's pretty simple to > make the user dial a prefix like "4" in the dial rule and send just the > 3 digits (dialed number prefix is 7 and 3 digits, resulting call is and > append matched suffix, etc., so 7200 transfers to voice mail on the > opposite system). > > >>> VG <[EMAIL PROTECTED]> 06/18/08 07:34 AM >>> > Hi all, > > Please specify the Detail to interconnect two sipx server. > > Regards, > > Vikas > >
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
