On Wed, 2009-03-25 at 06:30 +0800, Cuneyt M wrote: > Hi everyone, > > I just make a new installation for a new site with sipx 3.10.2 Centos > ISO (updated via stable repo to 3.10.3..) and AudioCodes MP118. > > Everything is pretty straightforward, didnt play with the settings out > of ordinary (same setup i did for 3.8 and 3.10.2 standalone with > MP118s). > > I have a single Local Dial plan enabled (and activated) with local > PSTN Prefix 7 (and "PSTN Prefix is not optional" checked - i've also > tried unchecking too which gave the same result below). > * I have set the number of digits to <any digits> as i wanted to keep > it simple for end-users to dial any number (local/international) for > this Local Dial Plan. > Again Activated. > > I register Xlite with user extension (which has permissions for the > Local Dial plan, cross checked the permission in both user and dial > plan which matches). > registered fine, i can call 101 and 100 and all that works. I can > dial-in from PSTN and forwarding to extension works (xlite rings). > > However, When i call an outside number from Xlite - say 72424445, it > attempts to ring and comes back with Internal Server Error. > > Couldnt figure what is causing this as this is the exact same setup > i've did for other servers and never came across such thing. > > I've then changed logging of sipproxy and callresolver to INFO from > NOTICE, following are the short extracts at the time of the call > took place; > > The logs are attached. > IP 192.168.11.2 is the SipX server > IP 192.168.11.3 is the MP118 > IP 192.168.11.50 is the PC with Xlite > > Can anybody shed some light on this rather mysterious issue? > I cant figure what really is going wrong here. > > When i check the AudioCodes log, what i saw is the PSTN Prefix in > Local Plan: 7 got actually passed to the AudioCodes Gateway. This > never happened to me as i always make straightforward setup and > checked PSTN Prefix is not optional. So why the prefix 7 is sent to > AudioCode is one of the mystery. > The second, rather bigger one, is what is causing Internal Server > Error. Even i remove prefix and dial the number directly from Xlite, > it gives the same error message: > > Internal Server Error. > > Would appreciate your help and guidance to shed some light. Quite > puzzled...
My guess is that the xlite is somehow sending the request directly to the audiocodes without going through the proxy. Certainly there is no INVITE in the proxy log extract you sent. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
