On Wed, 2009-03-25 at 11:36 +0800, Cuneyt M wrote: > Hi again Scott, > > Captured the MP118 log after updating firmware to latest(?) 5.4 > version. > > I have attached the log. Is there any clue or pointer what may be > causing this internal server error?
I don't see that same error in this new log fragment. It's _possible_ you now have another problem. Beware of assuming that you only have one problem at a time and that the symptom (call failure) means that you have not fixed it yet. You'd do better to include more information. You're only attaching small fragments of the logs - that last one did not include any response message at all, so it's likely that you cut off whatever the problem was. One thing I notice is that your xlite is not offering PCMU or PCMA codecs - it may be that the gateway doesn't have any of codecs in common with your phone. In addition to the Audiocodes log (everything from receiving the request to sending the response), you'll need to trace the message flow in the sipXproxy to see what's going wrong. See: http://sipx-wiki.calivia.com/index.php/Display_SIP_message_flow_using_Sipviewer#Getting_SIP_Messages_to_display when you get the trace data, take a look at it using sipviewer and/or post the trace with a description of your configuration (identify components by IP address), what you were doing, and which call in the trace you're talking about (by call-id or frame number in the trace, preferably). _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
