Hi again Scott,
With a bit of luck, i managed to find the firmware version
*5.40A.026.004* and updated the two MP118 we have.
After i update the firmware and went through the settings through remote
desktop, all the config seems to be retained - checked each.
Is there any place that I need to look, any setting or what not to fix
this issue?
Kindly let me know.
All the best
Scott Lawrence wrote:
On Wed, 2009-03-25 at 09:13 +0800, Cuneyt M wrote:
Hi Scott,
I setup the Xlite as per the previous installations which worked
flawlessly.
Enabled Invite All to Proxy too.
Attached are the sshots of xlite config, the internal server error and
the log from MP118 (level 5 debug output).
DNS resolution works OK at client and server side (passed the tests
etc.).
Where do you think the problem would be?
Here's the problem... from the Audiocodes log:
AcSIPParser: Problem in SIP Message Headers [Time:
9:5:40]25d:9h:5m:40s ( sip_stack)(1065 ) ?? [WARNING]
AcSIPParser: Warning. Branch is too long. Truncated to 49 chars [Time:
9:5:40]25d:9h:5m:40s
This is a known bug in some versions of the Audiocodes firmware. You
should be able to get a later version from them that fixes it.
The reason it didn't show up before is that 3.10.3 introduced an
important improvement in proxy loop detection, but the fix makes the Via
headers we generate somewhat longer and went over this ridiculously low
limit that Audiocodes used to have.
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
