Grant Lang wrote: > Hi, > > > > I have a problem with Dialling Rules and Gateway combinations. > > I am using an ITSP with multiple numbers, thus multiple gateways to the > same ITSP. > > This is required as the different numbers are for different > cities/regions and lets me take advantage of LCR (Least Cost Routing). > > So for example if I have an Auckland number and a Wellington number with > my ITSP I end up with two gateways registering to the same ITSP. That > part works perfectly. > > I create two Dialling Rules, one for Auckland (09) and one for > Wellington (04) and attach the appropriate Gateway. > > The problem is because 'host' is essentially the same the Dialling Rules > take no notice of the Gateway associated with the Rule and instead use > the Gateway at the top of the Gateway List. > > If you then modify one of the Gateways it moves to the bottom of the > list, thus changing the order and then the Dialling Rules use the other > gateway. > > I am sure this is not supposed to be like this and perhaps it is a bug? > > I would like to know if this is a feature or if it isn't possible to > have multiple gateways registered with the same ITSP. >
I am probably missing something but that should work as long as user part is different and in your case it is different since you are using 2 prefixes. Are you using location based routing as well? Do you mind attaching your fallbackrules.xml? D. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
