On Fri, 2009-04-03 at 17:39 +0200, Massimo Vignone wrote: > Scott Lawrence wrote: > > On Fri, 2009-04-03 at 09:57 +0200, Massimo Vignone wrote: > >> Ok, this is the expected behaviour, so I configured an user on the > >> gateway and in sipx with the right permission for long distance calls. > >> But debugging on the gateway, it seems that the proxy sends back a SIP > >> 407 message referred to the user specified in the From header, so the > >> call is dropped. > > > > What do you mean by "sends back a SIP 407 message referred to the user > > specified in the From header"? The proxy _does_not_ care whether there > > is any relationship between the From header identity and the identity in > > the Proxy-Authorization header sent in a retried request. > > Thanks Scott, this wasn't clear before... > > After configuring an user on Sipx to register the gateway, I got again a > SIP 407 message. > > After reading the thread, you confirmed me that the problem wasn't on > the sipx side, so I checked the gateway config and the call routing on > the legacy pbx side. > > On both there are some config issues: on the Patton gateway side, user > authentication credentials were specified without the keyword "default"; > on the legacy pbx side called numbers were sent to the gateway with the > wrong PSTN prefix. > > Now everything seems to work. > > Thanks for your support,
No problem - interesting case. It would be useful if you'd describe what you did (and how you configured that pbx-pbx gateway in particular) on the wiki. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
