On Tue 05.May.09 20:20, James Holmes wrote: >Does anyone have a working vitelity configuration that they can show me >(minus the username and password of course)? I have les.net working, but >my sipXecs 4 installation will not register with vitelity. Initially I >was using the template with my username and password added, but when >this didn't work I tried a few other things, but nothing has worked so >far. I did have vitelity working under trixbox using this configuration: I have vitelity working with sipXecs 4. I used the template and (besides my username and password) only changed the inbound vitelity server to match what they had assigned me.
I'm using sipXbridge, and had to change my setup at vitelity to point to my port 5080 instead of the default 5060. I'm pretty new to sipXecs, so this may not be the best or the only way to do this. > >TrixBox inbound setup: > >(I've replaced my username and password with [myusername] and [mypassword]) > >Trunk name: vitel-inbound > >Peer Details: > >type=friend >dtmfmode=auto >username=[myusername] >secret=[mypassword] >context=from-trunk ; (this could be ext-did or from-pstn as well) >insecure=very >canreinvite=no >host=inbound18.vitelity.net > >Register String: [myusername]:[[email protected]:5060 > >TrixBox outbound setup: > >Trunk name: vitel-outbound > >Peer Details: > >type=friend >dtmfmode=auto >username=[myusername] >secret=[mypassword] >fromuser=[myusername] >trustrpid=yes >sendrpid=yes >context=from-trunk ; (this could be ext-did or from-pstn as well) >canreinvite=no >host=outbound.vitelity.net > >Register String: left blank > >I've tried this in my sipXecs configuration: > >1) Used sipXecs template supplied values for vitelity with my username >and password. > >2) Same as 1, with the hostnames used in my previous trixbox configuration. > >3) Same as 2 with my trixbox inbound register string set as asserted >identity (yes I cleared the appropriate check box). > >4) Same as 3 with the ":5060" removed from register string and copied >into the "ITSP Registrar Listening Port" field. > >5) I've varied all of the above by selecting "Use public address for >call setup", and "strip private headers". > >I guess I just don't know how or if the TrixBox register string has any >direct equivalent in sipXecs. > >The other thing I was wondering about is the use of port 5060 by >Vitelity. Does this mean I also need to use port 5060? My current router >has very limited capabilities when it comes to port redirection (inbound >redirection only), so remapping ports is likely to be a problem unless I >insert another router into the path just to do the port swapping >(normally I wouldn't consider this, but my current router has some >capabilities I need for other things). > >-- >James Holmes >RTDS Technologies Inc. >(204) 989-9706 >_______________________________________________ >sipx-users mailing list >[email protected] >List Archive: http://list.sipfoundry.org/archive/sipx-users >Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > Dan McDaniel _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
