Sorry, meant Smartware 5.2 Build Series 2009-01-14 is the latest. >>> "McCoy, Chris" <[email protected]> 05/08/09 10:38 AM >>> I will give that a try, Thanks Chris
-----Original Message----- From: Tony Graziano [mailto:[email protected]] Sent: Friday, May 08, 2009 10:37 AM To: McCoy, Chris; [email protected] Cc: [email protected] Subject: Re: [sipx-users] patton gateways I typically do this WITH the pbx in the way, because it IS easier. the PBX does not negotiate the media. I just create a phantom user with the DID in sipx, disable voicemail then forward it to the num...@ipaddress of the other gateway. >>> milosz <[email protected]> 05/08/09 10:33 AM >>> i recommend you email patton support about this, esp. since it is not a sipx issue. On Fri, May 8, 2009 at 9:26 AM, McCoy, Chris <[email protected]>wrote: > I have a production sipx box with 2 patton smartnode gateways one is a > 4560 the other is a 4118, the 4560 has a pri with dids on it, the 4118 has > some fxs ports for a fax finder box, I need to route 4 dids directly from > the 4560 to the 4118 ports for the fxs, I know that these boxes have route > table capabilities, can some one help me out building some route tables to > route directly from one box to the other with out the pbx in the call > control path. > > Thanks > > chris > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
