It can't... Sorry for the delay... I'm swamped.
> -----Original Message----- > From: McCoy, Chris > Sent: Friday, May 08, 2009 11:07 AM > To: Tony Graziano > Cc: Picher, Michael > Subject: RE: [sipx-users] patton gateways > > I am not sure. > Mike do you know if 5.3 can send digits after it goes "connect" at the > other end > thanks > > -----Original Message----- > From: Tony Graziano [mailto:[email protected]] > Sent: Friday, May 08, 2009 11:05 AM > To: McCoy, Chris; [email protected] > Cc: [email protected] > Subject: RE: [sipx-users] patton gateways > > Sent to you off list... > > Does 5.3 mean it can send digits after it goes "connect" at the other > end now? > > >>> "McCoy, Chris" <[email protected]> 05/08/09 11:00 AM >>> > No we are running 5.3 on both gateways we are terminating the pri on > the > 4560 gateway and right now using the sipx to call forward the did > number > to the gateway 4118 with 4 of the fxs ports plugged inot the > faxfinder. > Thanks > Chris > > > -----Original Message----- > From: Tony Graziano [mailto:[email protected]] > Sent: Friday, May 08, 2009 10:58 AM > To: McCoy, Chris; [email protected] > Cc: [email protected] > Subject: RE: [sipx-users] patton gateways > > On the Faxfinders, their newer gateways only have a FXO port, and no > DID > port. This means they can't detect the DID dialed to them. Patton was > considering adding a function to dial "after" a connect was made. If > not, this would need a DID-to-analog adapter between the FXS device and > the fax device. > > What the gateway needs to be able to do is to pickup and then dial, > instead of dial then try to connect. I am sure the GA release firmware > of 5.4 doesn't address it. Do you have a pre-release that does? > > >>> "McCoy, Chris" <[email protected]> 05/08/09 10:38 AM >>> > I will give that a try, > Thanks > Chris > > -----Original Message----- > From: Tony Graziano [mailto:[email protected]] > Sent: Friday, May 08, 2009 10:37 AM > To: McCoy, Chris; [email protected] > Cc: [email protected] > Subject: Re: [sipx-users] patton gateways > > I typically do this WITH the pbx in the way, because it IS easier. the > PBX does not negotiate the media. I just create a phantom user with the > DID in sipx, disable voicemail then forward it to the num...@ipaddress > of the other gateway. > > > > > > >>> milosz <[email protected]> 05/08/09 10:33 AM >>> > i recommend you email patton support about this, esp. since it is not a > sipx > issue. > > On Fri, May 8, 2009 at 9:26 AM, McCoy, Chris > <[email protected]>wrote: > > > I have a production sipx box with 2 patton smartnode gateways one is > a > > 4560 the other is a 4118, the 4560 has a pri with dids on it, the > 4118 > has > > some fxs ports for a fax finder box, I need to route 4 dids directly > from > > the 4560 to the 4118 ports for the fxs, I know that these boxes have > route > > table capabilities, can some one help me out building some route > tables to > > route directly from one box to the other with out the pbx in the call > > control path. > > > > Thanks > > > > chris > > > > _______________________________________________ > > sipx-users mailing list > > [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-users > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > > > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
