On Wed, 2009-06-10 at 17:30 +0700, Boy Aidil Sjam wrote: > Scott, > I've setup lab environment before go live to public network (internet), and I > like to see how it works. > There's no NAT involve in this lab testing. > The scenarios: > 1. I installed 2 sipXecs server, each server in their own domain. > 2. Each server use the same dial-plan (I set up ext. 200 - 201) > 3. I set up prefix 9 to dial to another domain. > 4. User from server A able to dial server B autoattendant using 9100 and able > to transfer to another extension and vice versa. > 5. But when one of the user want to dial directly to user extension in > another server (dialed 9200) the call directly terminated. > > Is that the way how the sipXecs works or is there something wrong with my > configuration?
That should work. To debug this, you'll need to trace the message flow and see what's going wrong. See: http://sipx-wiki.calivia.com/index.php/Display_SIP_message_flow_using_Sipviewer#Getting_SIP_Messages_to_display when you get the trace data, take a look at it using sipviewer and/or post the trace with a description of your configuration (identify components by IP address), what you were doing, and which call in the trace you're talking about (by call-id or frame number in the trace, preferably). _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
