I did a while back, both a User and a Factory reset, and I "thought" I followed the Wiki. By now I am sure it's no where near that point given all the things I have tried. Let me reset it and try it again just to make sure I didn't miss something or change to much.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Matt Keys Sent: Tuesday, June 16, 2009 10:04 PM To: Clint Anderson Cc: [email protected] Subject: Re: [sipx-users] Can not dial extensions via LinkSys SPA-2102 orLinkSys SPA-3102 Have you tried a factory reset of the SPA-2102? Only change what's covered in the Wiki http://sipx-wiki.calivia.com/index.php/HowTo_configure_Linksys/Sipura_Gatewa ys_(FXS) On Tue, 2009-06-16 at 21:06 -0500, Clint Anderson wrote: > Scott, > > Thank you for your reply. Yes, I checked the registrations and all the > phones, soft phones, and the LinkSys devices are all registered. > > I don't know if this will help or not, but here is the link to my original > post with the details of the topology / configurations, the problem details, > and a small list of the things I have tried: > http://list.sipfoundry.org/archive/sipx-users/msg14406.html > > Cheers, > Clint > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Scott Lawrence > Sent: Tuesday, June 16, 2009 8:32 PM > To: Clint Anderson > Cc: [email protected] > Subject: Re: [sipx-users] Can not dial extensions via LinkSys SPA-2102 > orLinkSys SPA-3102 > > On Tue, 2009-06-16 at 19:26 -0500, Clint Anderson wrote: > > Sorry for the triple post, I am trying the attachments zipped this time to > > see if they make it. > > > > I have attached 3 siptraces, #1 is the problem, and the other 2 are just > to > > show that some calls do work. > > > > 1) LinkSysToPolycom.xml = An unsuccessful call from a phone connected to > > the LinkSys to a Polycom phone. > > > > 2) PolycomToLinkSys.xml = A successful call from a Polycom phone to a > phone > > connected to the LinkSys. > > > > 3) LinkSysToAttendant.xml = A successful call from a phone connected to > the > > LinkSys to the attendant (Ext. 100). > > > > Thank you all for your help! > > The most likely explanation is that the Polycom was not registered at > the time you made call (1) - did you check Diagnostics > Registrations ? > > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
