On Thu, Jul 30, 2009 at 3:19 PM, Derek Bartolo < [email protected]> wrote:
> Just double checked, dial plan is at the top with the trunk assigned to it. > Still the busy signal Oops, didn't include sipx-users on my last reply: You probably already know this, but Unlimitel requires 10 digit local dialing. Make sure you aren't dialing the 1 and that you don't have a prefix for 1 set up anywhere (gateway or dial plan). Also check the external number length in the dial plan (should be set to 10 or "any number of digits", depending on your other dial plans and how you want it to work, for testing, set it to any number of digits). To make sure no other dial plans are interfering, don't treat the prefix as optional, make sure there are no other dial plans with the same prefix, and make sure you use the prefix when dialing out.
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
