Mike, I think Todd indicated the AudioCodes Mediant 1000 can handle this for you in the gateway. I don't know that product so I won't comment about it.
The SmartNode gateways that I like can detect fax tones and can route T.38 signaling but can not route to a different destination based on whether the call is a fax (that I can tell...). If it could, you could just route to another sip gateway connected to a fax device (like a MultiTech FaxFinder). The advantage Asterisk has here is that the PBX itself sits in the call path. While this is a nice trick for being able to detect things like fax and DTMF codes it kills performance because the PBX must process all calls that are coming through the PBX. Mike -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Tuesday, August 11, 2009 9:27 PM To: sipx-users Subject: Re: [sipx-users] Dealing with combined voice/faxing Anyone else also have some input? I just can't see why this could not be done. After all, I'm already doing it using SIP trunks and an asterisk box. I can call someone or send a fax to the same DID. All I really need is to find a way of either using sipxecs to re-route the fax to another device, or find a gateway which will send the call to the proper device. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
