Hi Alberto,

 

I pasted the line 

<dkey_retrieve perm="R">speed 3663</dkey_retrieve>

Just before the 

<!-- speeddial list -->

Line.

 

After resending phone profiles retrieve button works as expected - call to
3663 (that is my voicemail system number) occurs.

 

Thank you very much for the help!

 

By the way, I found that sipX wiki page regarding snom provisioning in not
quite good.

I configured dhcpd differently.

I could share my findings if you like to..

 

Thanks again,

Nikolay.

 

  _____  

From: Alberto [mailto:[email protected]] 
Sent: Friday, September 11, 2009 1:53 PM
To: Nikolay Kondratyev
Cc: [email protected]
Subject: Re: [sipx-users] Snom voicemail retrieve button

 

Hi Nikolay,
yes it is possible. Just leave the mwi configuration as is configured from
the sipxconfig snom plug-in. Then set for the function key  RETRIEVE (right
now only from the phone web-ui) Type=Speed Dial and Number 101. This will
make the phone mwi work and the retrieve button call the voicemail. 
In case you have many phones I suggest you to add the following line in
/etc/sipxpbx/snom/snom.vm
<dkey_retrieve perm="R">speed 101</dkey_retrieve>
I would add it just before the speed dial section. You will need of course
to regenerate your phone profiles.

I plan to add this on the next Snom plug-in update. Don't know yet if I will
add all function keys management from sipxconfig. 

Let me know
Alberto

Nikolay Kondratyev ha scritto: 

Hi all,

 

There is a "mailbox" configuration parameter in the snom phone.

And this parameter is used for both mwi subscription and voice mail
retrieving when pushing "retrieve" button on the snom phone (calling to
voicemail system).

But in case of sipX one should use his own number for mwi subscription and
another (systemwide) number for calling voicemail system.

 

Is it possible to make snom phone to call to voicemail system when pressing
retrieve button, while keeping correct mwi subscription? And I'd like to
configure a snom pnone through sipX plugin, not through it's own web
interface.

 

Has somebody encountered this problem?

 

Thanks in advance,

Nikolay.

 

 





  _____  



 
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/

 

_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/

Reply via email to