Hi Nikolay,
you're right the wiki page was not updated accordingly after the last
snom plug-in update.
I should ask for permissions to update it.
What did you discover about dhcpd?
Alberto
Nikolay Kondratyev ha scritto:
Hi Alberto,
I pasted the line
<dkey_retrieve perm="R">speed 3663</dkey_retrieve>
Just before the
<!-- speeddial list -->
Line.
After resending phone profiles retrieve button works as expected --
call to 3663 (that is my voicemail system number) occurs.
Thank you very much for the help!
By the way, I found that sipX wiki page regarding snom provisioning in
not quite good...
I configured dhcpd differently...
I could share my findings if you like to..
Thanks again,
Nikolay.
------------------------------------------------------------------------
*From:* Alberto [mailto:[email protected]]
*Sent:* Friday, September 11, 2009 1:53 PM
*To:* Nikolay Kondratyev
*Cc:* [email protected]
*Subject:* Re: [sipx-users] Snom voicemail retrieve button
Hi Nikolay,
yes it is possible. Just leave the mwi configuration as is configured
from the sipxconfig snom plug-in. Then set for the function key
RETRIEVE (right now only from the phone web-ui) Type=Speed Dial and
Number 101. This will make the phone mwi work and the retrieve button
call the voicemail.
In case you have many phones I suggest you to add the following line
in /etc/sipxpbx/snom/snom.vm
<dkey_retrieve perm="R">speed 101</dkey_retrieve>
I would add it just before the speed dial section. You will need of
course to regenerate your phone profiles.
I plan to add this on the next Snom plug-in update. Don't know yet if
I will add all function keys management from sipxconfig.
Let me know
Alberto
Nikolay Kondratyev ha scritto:
Hi all,
There is a "mailbox" configuration parameter in the snom phone.
And this parameter is used for both mwi subscription and voice mail
retrieving when pushing "retrieve" button on the snom phone (calling
to voicemail system).
But in case of sipX one should use his own number for mwi subscription
and another (systemwide) number for calling voicemail system...
Is it possible to make snom phone to call to voicemail system when
pressing retrieve button, while keeping correct mwi subscription? And
I'd like to configure a snom pnone through sipX plugin, not through
it's own web interface...
Has somebody encountered this problem?
Thanks in advance,
Nikolay.
------------------------------------------------------------------------
_______________________________________________
sipx-users mailing list [email protected]
<mailto:[email protected]>
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
