Hello,
I need help setting up an Audiocodes Gateway MP118 FXS_FXO (Firmware version
5.60A.009.005. On Sipx 4.02. Currently I can dial out from IP to one of the
PSTN lines but can not dial in. (PSTN to IP) From the PSTN line I hear ringing
but the call does not seem to get answered. When I look at the SIPChannel
Information on the MP118 the Endpoint Status changes from IDLE to ACTIVE for
the duration of the "Ring Detection Timeout" and then back to IDLE and the line
keeps on ringing.
For some reason the Sipx generated Audicodes ini file does not seem to work at
all (even the IP to PSTN call does not work) so I used the default Audicodes
ini file and configured the entries manually. (IP address, Routing Tables and
Endpoint number)
Any help would be greatly appreciated.
Thank you and Best Regards,
Csaba
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
