Hi, Have you configurated in the audiocodes "Tel to IP Routing table" ? Any error message in the syslog of the audiocode ?
2009/9/28 Csaba Kalman <[email protected]> > Hello, > > I need help setting up an Audiocodes Gateway MP118 FXS_FXO (Firmware > version 5.60A.009.005. On Sipx 4.02. Currently I can dial out from IP to > one of the PSTN lines but can not dial in. (PSTN to IP) From the PSTN line I > hear ringing but the call does not seem to get answered. When I look at the > SIPChannel Information on the MP118 the Endpoint Status changes from IDLE to > ACTIVE for the duration of the "Ring Detection Timeout" and then back to > IDLE and the line keeps on ringing. > > For some reason the Sipx generated Audicodes ini file does not seem to work > at all (even the IP to PSTN call does not work) so I used the default > Audicodes ini file and configured the entries manually. (IP address, Routing > Tables and Endpoint number) > > Any help would be greatly appreciated. > > Thank you and Best Regards, > > Csaba > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > > -- (@'.')@ @('.'@)
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
