Hi,
As far as I know sipx audiocodes plugin supports only fxo or fxs models. It does not support mixed fxs/fxo models (that's what you are seeing). So. you have to configure your fxs/fxo gateway manually :-(. HTH, Nikolay. _____ From: [email protected] [mailto:[email protected]] On Behalf Of Csaba Kalman Sent: Monday, September 28, 2009 7:12 PM To: [email protected] Subject: [sipx-users] MP118 FXS_FXO problem Hello, I need help setting up an Audiocodes Gateway MP118 FXS_FXO (Firmware version 5.60A.009.005. On Sipx 4.02. Currently I can dial out from IP to one of the PSTN lines but can not dial in. (PSTN to IP) From the PSTN line I hear ringing but the call does not seem to get answered. When I look at the SIPChannel Information on the MP118 the Endpoint Status changes from IDLE to ACTIVE for the duration of the "Ring Detection Timeout" and then back to IDLE and the line keeps on ringing. For some reason the Sipx generated Audicodes ini file does not seem to work at all (even the IP to PSTN call does not work) so I used the default Audicodes ini file and configured the entries manually. (IP address, Routing Tables and Endpoint number) Any help would be greatly appreciated. Thank you and Best Regards, Csaba
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
