I have 3 numbers in the alias section. 1+area code+number
area code+number number routing to the extension works fine for incoming calls. They ring through with no problems, its just that once they're connected they won't forward back out like they're suppose to. Josh McDonald | Systems Administrator | Brammo, Inc. Email: [email protected] | www.brammo.com 550 Clover Lane | Ashland, OR 97520 Phone: 541.482.9555 ext. 339 | Mobile: 541.531.0005 | Fax: 541.552.0414 MCSA 2003 -----Original Message----- From: Tony Graziano [mailto:[email protected]] Sent: Tuesday, November 03, 2009 4:23 PM To: Josh McDonald; [email protected] Subject: Re: [sipx-users] Call Forwarding to External number. I think I need to ask, areyou creating a local account with a 7 digit number? It should be created with a 3 or 4 digit number, but you run the risk of creating a more complex dialplan when dialing local calls. The DID should be entered as an alias for the user account. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: [email protected] <[email protected]> Sent: Tue Nov 03 19:18:37 2009 Subject: [sipx-users] Call Forwarding to External number. I appear to be encountering some problems with forwarding to an external number. This extension is setup with a DiD number so instead of your standard 3 digit extension we have the full number in there. What I'm wanting this extension to do is forward directly to an external number but for some reason I get the message saying this extension is unavailable and to leave a voice mail. If I set it to forward to an internal extensions that works correctly. I've tried adjusting the time in seconds from 1 - 30. I've tried toggling "If no response" or "At same time" neither has an effect. The dial plan allows for this extension to dial externally and it has no problems doing that. From what I understand enabling the permission "Forward Calls External" is no longer required in 4.02 because the forwarding rules go by the dial plan settings. Any ideas what the problem might be? Josh McDonald | Systems Administrator | Brammo, Inc. Email: [email protected]<mailto:[email protected]> | www.brammo.com<http://www.brammo.com/> 550 Clover Lane | Ashland, OR 97520 Phone: 541.482.9555 ext. 339 | Mobile: 541.531.0005 | Fax: 541.552.0414 MCSA 2003 _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
