Tony Graziano wrote: > Is there a way within sipx to receive the 10 digit caller-id from the > telco (using pri gateway now) and in this instance, within two different > area codes, specify certain NXX's strip the NPA off before sending them > back out via the phone? > > Example: Polycom 650 receives call from 434-202-1234, this is a local > call. TELCO says dial 7 digits. Looking for a rule that says > 434-202-xxxx is modified to 202-xxx and sent when dialed. BUT > 434-998-1234 is long distance and needs to be dialed as 434-998-1234. > > NOT ALL 434 (NOA) numbers are local. I have a list of two different > NPA's with NXX's that are local. > > Looking through the custom rules, I don;t see a way to specify all the > different NXX's without creating an individual rule. > > Alternately I might do this in the gateway or by asking the TELCO for a > modification. What I am wondering is if there is a way in sipXconfig > dial plans to do this easily or not. > > Any ideas? >
It looks to me like a simple case of Custom rules with multiple matching patterns. But I might be misunderstanding something. Could you give some more examples on how you want these numbers to be translated. D. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
