Sipx is set up without NAT Traversal, using two external opensbc/vyatta servers.
Calls To/From internal sipx to PSTN or other internal and trough ITSP's work fine. Remote users authenticated via opensbc are able to make calls but receive ring only, no audio either way. Calling a remote that is over the opensbc server either from PSTN or internal, they get ring and no audio either way. Since they are able to make calls and get full audio, it seems that ports aren't the issue, at least one way. So basically, everything works but unable to send RTP to users authenticated using opensbc. They are getting the ring which means that sipx is doing the call setup but then there is no RTP. Not quite sure what to look for in the logs because there isn't anything obvious yet. Could someone send a few thoughts on what I should be looking for. Thanks much. Mike _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
