Oops I think I forgot some of the commands (run these):
setfacl -d -m user:PlcmSpIp:rw-
/var/sipxdata/configserver/phone/profile/tftproot/*
setfacl -m user:PlcmSpIp:rwx
/var/sipxdata/configserver/phone/profile/tftproot/SoundPointIPLocalization
The i on the end of the log entry means the phone can't write the file.
It's either a permissions issue or a configuration error. If the phone
still can't write the file after you run the previous command, run the
following commands to see if it's a permissions issue:
getfacl /var/sipxdata/configserver/phone/profile/tftproot
should give you the following output:
# file: tftproot
# owner: sipxchange
# group: sipxchange
user::rwx
group::rwx
other::r-x
default:user::rwx
default:user:PlcmSpIp:rwx
default:group::rwx
default:mask::rwx
default:other::r-x
now get the acl information on one of the files:
getfacl
/var/sipxdata/configserver/phone/profile/tftproot/0004f22732c9-sipx-sip.cfg
should show:
# owner: sipxchange
# group: sipxchange
user::rw-
user:PlcmSpIp:rw-
group::r--
mask::rw-
other::r--
ACL's can be difficult to manage without a proper GUI. Fortunately
Webmin 1.500 now has a file module that you can use to manage ACL's.
Also, make sure in /etc/vsftpd/vsftpd.conf
write_enable=YES
is set.
Josh Patten
Assistant Network Administrator
Brazos County IT Dept.
(979) 361-4676
On 1/22/2010 1:54 PM, [email protected] wrote:
It looks like it tried to do something with that file though. This is
in xferlog:
Fri Jan 22 19:38:13 2010 1 10.87.20.241 0 /0004f22732c9-phone.cfg b _
i r PlcmSpIp ftp 0 * i
Fri Jan 22 19:38:37 2010 1 10.87.20.241 0 /0004f22732c9-phone.cfg b _
i r PlcmSpIp ftp 0 * i
Fri Jan 22 19:39:33 2010 1 10.87.20.240 0 /0004f226931b-phone.cfg b _
i r PlcmSpIp ftp 0 * i
On 1/22/2010 1:51 PM, [email protected] wrote:
Not exactly.. I see these:
[r...@nshpbx1 tftproot]# ls -lsrt |grep "32c9"
20 -rw-rw-r--+ 1 sipxchange sipxchange 13638 Jan 22 13:40
0004f22732c9-sipx-sip.cfg
20 -rw-rw-r--+ 1 sipxchange sipxchange 15228 Jan 22 13:40
0004f22732c9-sipx-phone.cfg
8 -rw-rw-r--+ 1 sipxchange sipxchange 447 Jan 22 13:40
0004f22732c9-sipx-device.cfg
8 -rw-rw-r--+ 1 sipxchange sipxchange 217 Jan 22 13:40
0004f22732c9-directory.xml
8 -rw-rw-r--+ 1 sipxchange sipxchange 1007 Jan 22 13:40
0004f22732c9.cfg
None of them have the exact name you mention. I made the permission
changes you recommended, restarted sipx, changed ring type on a
phone, then rebooted the phone since nothing showed u p at that point.
0004f22732c9-sipx-phone.cfg starts out like this and does not contain
the word OVERRIDES
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!--
"Override" Per-phone Configuration File
Generated by sipXecs: http://www.sipfoundry.org/
Instructions for integrating new configuration file content
into sipXconfig:
http://sipx-wiki.calivia.com/index.php/Adding_Polycom_SoundPoint_IP_New_Configuration_File_Content_into_sipXconfig
These 2 files are in the tftproot directory and were modified at the
same time:
200 -rw-rw-r--+ 1 sipxchange sipxchange 194052 Jan 22 13:40
polycom_sip.cfg
16 -rw-rw-r--+ 1 sipxchange sipxchange 11969 Jan 22 13:40
polycom_phone1.cfg
Am I missing something?
On 1/22/2010 1:35 PM, Josh Patten wrote:
To ensure that it is working, verify the phone is writing a file
called <mac-address>-phone.cfg with contents similar to the
following (depending on the preferences set):
<?xml version="1.0" standalone="yes"?>
<PHONE_CONFIG>
<OVERRIDES attendant.ringType="1" reg.1.ringType="13"
bg.hiRes.gray.selection="1,1"/>
</PHONE_CONFIG>
Josh Patten
Assistant Network Administrator
Brazos County IT Dept.
(979) 361-4676
On 1/22/2010 1:22 PM, [email protected] wrote:
Thank you. I just did actually before i read this. I hadn't even
really looked at what the command did. I didn't realize how minor
of a change it was.
On 1/22/2010 1:19 PM, Josh Patten wrote:
You might want to consider doing it now because the phones only
write the configuration when a change has been made. If a user
doesn't change any of their user preferences after you enable
writes to the tftp directory then all their customization will be
lost.
Josh Patten
Assistant Network Administrator
Brazos County IT Dept.
(979) 361-4676
On 1/22/2010 12:17 PM, [email protected] wrote:
Thanks.That makes sense and I think I will look into before I do
any upgrades. You probably just saved me a headache down the
road, because even in training people have already gotten all
excited about all the customization they can do. I just wanted to
test the setting on my test environment a little first.
On 1/22/2010 12:02 PM, Josh Patten wrote:
The only problem with not setting the tftp directory writable is
that when you do a firmware/bootrom update it erases the local
config on the phone, setting everyones preferences back to
default. I had some annoyed people calling me when I did my
first firmware upgrade.
Josh Patten
Assistant Network Administrator
Brazos County IT Dept.
(979) 361-4676
On 1/22/2010 11:59 AM, [email protected] wrote:
Sorry. I had read one of the other replies first.
Setting the blank ring tone seems to stick through a profile
push, and I am hesitant to make a significant change to the
system with a cutover to production in 6 hours. I just went the
blank ring tone route.
On 1/22/2010 11:51 AM, Josh Patten wrote:
That's what I said in a previous post, along with instructions
on how to make it stick.
Josh Patten
Assistant Network Administrator
Brazos County IT Dept.
(979) 361-4676
On 1/22/2010 11:44 AM, Picher, Michael wrote:
Did I miss something... on the line attached to the phone
cant you just set the ring type to 0?
*From:* [email protected]
[mailto:[email protected]] *On Behalf Of
*[email protected]
*Sent:* Friday, January 22, 2010 11:45 AM
*To:* Eric Varsanyi
*Cc:* [email protected]
*Subject:* Re: [sipx-users] Disable ringing on one Polycom phone
Thanks. I just finished doing that as well. We have all also
noticed the click between cycles on our custom ringtones. We
haven't experienced clicking at each ring. I was able to get
it up to 30 seconds and keep it under the size limits so the
clicking should be held to1 at most. I set it to this file
for the ringtone, and that did stick through pushing out a
profile. I'm ok with having to redo it if I do a firmware
upgrade.
On 1/22/2010 10:34 AM, Eric Varsanyi wrote:
I tried to make a 'blank' ringtone for a polycom 650 for a
similar reason (two phones in the same room). I used Audacity
and the appropriate parameters to export the silence. The
only problem is (despite trying several DC offsets) the phone
'clicks' when it rings and clicks between each ring cycle. I
made the silence long which helped but the click was still a
little annoying.
-Eric
On Jan 22, 2010, at 10:20 AM, [email protected]
<mailto:[email protected]> wrote:
Thanks. So nothing with ringing there.
Any way to do it with ringtones? Maybe a way to force a blank
ringtone to it?
On 1/22/2010 10:11 AM, Tony Graziano wrote:
The only settable volume between reboots is in the device
voice/codecs area.
Volume Persistence
The user's selection of the receive volume during a call can
be remembered between calls. This can be configured per
termination (handset, headset and handsfree/chassis). In some
countries regulations exist which dictate that receive volume
should be reset to nominal at the start of each call on
handset and headset.
persist.handset
[ ]
(Default: unchecked)
If checked, the receive volume will be remembered between
calls. If set to 0, the receive volume will be reset to
nominal at the start of each call.
persist.headset
[ ]
(Default: unchecked)
If checked, the receive volume will be remembered between
calls. If set to 0, the receive volume will be reset to
nominal at the start of each call.
persist.handsfree
[X]
(Default: checked)
If checked, the receive volume will be remembered between
calls. If set to 0, the receive volume will be reset to
nominal at the start of each call.
It is settable by group.
On Fri, Jan 22, 2010 at 10:52 AM, [email protected]
<mailto:[email protected]> <[email protected]
<mailto:[email protected]>> wrote:
Is there an easy way to make a single phone not ring, and
have it stick
through the profile being pushed out?
this is on a Polycom 550. My CEO has a second phone on his
conference
table. He likes to have only his desk phone ring, but be able
to answer
the call on either phone. No problem, I just assigned his
line to both
phones and turned down the ringer with the volume button on the
conference table phone. That setting doesn't stick when you
re-push a
profile out. Is there any way to set that at the sipx level
for that
phone so it would stick?
Thanks as always,
Matthew
Sipx 4.0.4, sixbridge, Verizon VOIP, No firewall (not needed,
private
connection), Polycom 450s and 550s - bootrom 4.2.1, firmware
3.1.3C split.
_______________________________________________
sipx-users mailing list [email protected]
<mailto:[email protected]>
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe:
http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
--
======================
Tony Graziano, Manager
Telephone: 434.984.8430
Fax: 434.984.8431
Email: [email protected]
<mailto:[email protected]>
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
Fax: 434.984.8427
Helpdesk Contract Customers:
http://www.myitdepartment.net/gethelp/
Why do mathematicians always confuse Halloween and Christmas?
Because 31 Oct = 25 Dec.
_______________________________________________
sipx-users mailing list [email protected]
<mailto:[email protected]>
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe:
http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing [email protected]
List Archive:http://list.sipfoundry.org/archive/sipx-users
Unsubscribe:http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX --http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing [email protected]
List Archive:http://list.sipfoundry.org/archive/sipx-users
Unsubscribe:http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX --http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
