Did I miss something... on the line attached to the phone cant
you just set the ring type to 0?
*From:* [email protected]
[mailto:[email protected]] *On Behalf Of
*[email protected]
*Sent:* Friday, January 22, 2010 11:45 AM
*To:* Eric Varsanyi
*Cc:* [email protected]
*Subject:* Re: [sipx-users] Disable ringing on one Polycom phone
Thanks. I just finished doing that as well. We have all also
noticed the click between cycles on our custom ringtones. We
haven't experienced clicking at each ring. I was able to get
it up to 30 seconds and keep it under the size limits so the
clicking should be held to1 at most. I set it to this file for
the ringtone, and that did stick through pushing out a profile.
I'm ok with having to redo it if I do a firmware upgrade.
On 1/22/2010 10:34 AM, Eric Varsanyi wrote:
I tried to make a 'blank' ringtone for a polycom 650 for a
similar reason (two phones in the same room). I used Audacity
and the appropriate parameters to export the silence. The only
problem is (despite trying several DC offsets) the phone
'clicks' when it rings and clicks between each ring cycle. I
made the silence long which helped but the click was still a
little annoying.
-Eric
On Jan 22, 2010, at 10:20 AM, [email protected]
<mailto:[email protected]> wrote:
Thanks. So nothing with ringing there.
Any way to do it with ringtones? Maybe a way to force a blank
ringtone to it?
On 1/22/2010 10:11 AM, Tony Graziano wrote:
The only settable volume between reboots is in the device
voice/codecs area.
Volume Persistence
The user's selection of the receive volume during a call can be
remembered between calls. This can be configured per
termination (handset, headset and handsfree/chassis). In some
countries regulations exist which dictate that receive volume
should be reset to nominal at the start of each call on handset
and headset.
persist.handset
[ ]
(Default: unchecked)
If checked, the receive volume will be remembered between
calls. If set to 0, the receive volume will be reset to nominal
at the start of each call.
persist.headset
[ ]
(Default: unchecked)
If checked, the receive volume will be remembered between
calls. If set to 0, the receive volume will be reset to nominal
at the start of each call.
persist.handsfree
[X]
(Default: checked)
If checked, the receive volume will be remembered between
calls. If set to 0, the receive volume will be reset to nominal
at the start of each call.
It is settable by group.
On Fri, Jan 22, 2010 at 10:52 AM, [email protected]
<mailto:[email protected]> <[email protected]
<mailto:[email protected]>> wrote:
Is there an easy way to make a single phone not ring, and have
it stick
through the profile being pushed out?
this is on a Polycom 550. My CEO has a second phone on his
conference
table. He likes to have only his desk phone ring, but be able
to answer
the call on either phone. No problem, I just assigned his line
to both
phones and turned down the ringer with the volume button on the
conference table phone. That setting doesn't stick when you
re-push a
profile out. Is there any way to set that at the sipx level for
that
phone so it would stick?
Thanks as always,
Matthew
Sipx 4.0.4, sixbridge, Verizon VOIP, No firewall (not needed,
private
connection), Polycom 450s and 550s - bootrom 4.2.1, firmware
3.1.3C split.
_______________________________________________
sipx-users mailing list [email protected]
<mailto:[email protected]>
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
--
======================
Tony Graziano, Manager
Telephone: 434.984.8430
Fax: 434.984.8431
Email: [email protected]
<mailto:[email protected]>
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
Fax: 434.984.8427
Helpdesk Contract Customers:
http://www.myitdepartment.net/gethelp/
Why do mathematicians always confuse Halloween and Christmas?
Because 31 Oct = 25 Dec.
_______________________________________________
sipx-users mailing list [email protected]
<mailto:[email protected]>
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing [email protected]
List Archive:http://list.sipfoundry.org/archive/sipx-users
Unsubscribe:http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX --http://www.sipfoundry.org/
