http://www.mail-archive.com/[email protected]/msg214182.html
Has some information on config file settings for changing the gain in /etc/sipxpbx/polycom/polycom_sip.cfg as always, read the SIP administrator manual for you phones from Polycom. Josh Patten Assistant Network Administrator Brazos County IT Dept. (979) 361-4676 On 1/26/2010 8:54 AM, [email protected] wrote: > Slightly off topic, but i couldn't think of a better group to ask. This > is for Polycom 450s.We have 100+ users with Plantronics headsets. They > vary slightly in model, but are all simple non powered and non amplified > headsets. My users are complaining that they aren't loud enough. They > aren't able to hear even with the volume turned all the way up. I have > made the change in sipx to allow the headset volume setting to stick > between calls. I'm assuming there is no way to resolve this (I would be > thrilled if there was). I'm looking for a recommendation from others as > to any simple wired headsets they have had a good experience with.I > searched the archives, and most of the questions seemed to be about > wireless headsets. > > Thanks, > Matthew > > Sipx 4.0.4, sixbridge, Verizon VOIP, No firewall (not needed, private > connection), Polycom 450s and 550s - bootrom 4.2.1, firmware 3.1.3C split. > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
