Thanks. That did it! On 1/26/2010 9:00 AM, Josh Patten wrote: > http://www.mail-archive.com/[email protected]/msg214182.html > > > Has some information on config file settings for changing the gain in > /etc/sipxpbx/polycom/polycom_sip.cfg > > as always, read the SIP administrator manual for you phones from Polycom. > > Josh Patten > Assistant Network Administrator > Brazos County IT Dept. > (979) 361-4676 > > > On 1/26/2010 8:54 AM, [email protected] wrote: >> Slightly off topic, but i couldn't think of a better group to ask. This >> is for Polycom 450s.We have 100+ users with Plantronics headsets. They >> vary slightly in model, but are all simple non powered and non amplified >> headsets. My users are complaining that they aren't loud enough. They >> aren't able to hear even with the volume turned all the way up. I have >> made the change in sipx to allow the headset volume setting to stick >> between calls. I'm assuming there is no way to resolve this (I would be >> thrilled if there was). I'm looking for a recommendation from others as >> to any simple wired headsets they have had a good experience with.I >> searched the archives, and most of the questions seemed to be about >> wireless headsets. >> >> Thanks, >> Matthew >> >> Sipx 4.0.4, sixbridge, Verizon VOIP, No firewall (not needed, private >> connection), Polycom 450s and 550s - bootrom 4.2.1, firmware 3.1.3C >> split. >> _______________________________________________ >> sipx-users mailing list [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >> sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
