Are you planning to fix the no ring back issue? Hiral Patel
OnRelay Elizabeth House | 39 York Road, London SE1 7NQ, UK | +44 (0) 2079028138| [email protected] | www.onrelay.com | This electronic message transmission contains information from OnRelay, Ltd., that may be confidential or privileged. The information is intended solely for the recipient and use by any other party is not authorised. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information or any attachment, is prohibited. If you have received this electronic transmission in error, please notify us immediately by electronic mail ([email protected]) and delete this message, along with any attachments, from your computer. Registered in England No 04006093 | Registered Office 1st Floor, 236 Gray's Inn Road, London WC1X 8HL -----Original Message----- From: Scott Lawrence [mailto:[email protected]] Sent: 10 February 2010 11:17 To: Hiral Patel Cc: [email protected]; OnRelayENG Subject: Re: [sipx-users] REFER/ sipXbridge does not play ringback On Tue, 2010-02-09 at 23:48 +0000, Hiral Patel wrote: > > sipXbridge currently anchors all media when enabled, in sipXecs 4.2 - > I see that you have implemented a media release mode to solve the > media anchoring problem. Will this media release mode also fix the no > ring back issues if sipXbridge is configured in media release mode? No. The problem is that sipXbridge handles REFER from the sipXproxy side by turning it into a re-INVITE on the 'outside'. Normally, the ring indication in a call setup is either provided as in-band audio (183 response with SDP), or by a 180 Ringing response - there's no way to force the latter, and sipXbridge never injects in-band media. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
