Perhaps what you are looking for is a special "ringback on blind transfer" URL that is not played on any other call flow except when the phone is ringing on transfer.
I believe this would be feasible to implement. Ranga On Wed, Feb 10, 2010 at 2:18 AM, Hiral Patel <[email protected]> wrote: > Yes we have considered this option but it can affect other used cases such > as calls on hold and conference > > > > Hiral Patel > > OnRelay > > Elizabeth House | 39 York Road, London SE1 7NQ, UK | +44 (0) > 2079028138| [email protected] | www.onrelay.com | > > This electronic message transmission contains information from OnRelay, > Ltd., that may be confidential or privileged. The information is intended > solely for the recipient and use by any other party is not authorised. If > you are not the intended recipient, be aware that any disclosure, copying, > distribution or use of the contents of this information or any attachment, > is prohibited. If you have received this electronic transmission in error, > please notify us immediately by electronic mail ([email protected]) and > delete this message, along with any attachments, from your computer. > Registered in England No 04006093 ¦ Registered Office 1st Floor, 236 Gray's > Inn Road, London WC1X 8HL > > > > ________________________________ > > From: Todd Hodgen [mailto:[email protected]] > Sent: 10 February 2010 16:41 > To: Hiral Patel > Subject: RE: [sipx-users] REFER/ sipXbridge does not play ringback > > > > Could you make your music on a hold a recording of a ring? > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Hiral Patel > Sent: Tuesday, February 09, 2010 3:49 PM > To: [email protected] > Cc: OnRelayENG > Subject: [sipx-users] REFER/ sipXbridge does not play ringback > > > > Hello Everyone, > > > > Problem: > > > > When SipXecs bridge is enabled and a scenario which uses a REFER is > implemented e.g. a transfer, no ring back is heard. > > > > I understand this is a known issue with sipXbridge, and it is recommended > that MOH is used as a substitute to ring back, but this is not a solution we > are able to use due to expectations. > > > > Question: > > > > sipXbridge currently anchors all media when enabled, in sipXecs 4.2 - I see > that you have implemented a media release mode to solve the media anchoring > problem. Will this media release mode also fix the no ring back issues if > sipXbridge is configured in media release mode? > > > > Regards, > > Hiral Patel > > OnRelay > > Elizabeth House | 39 York Road, London SE1 7NQ, UK | +44 (0) 2079028138 > | [email protected] | www.onrelay.com | > > > > OnRelay in the News: > > OnRelay Named in Tech Media Invest Top 100 > > http://www.guardian.co.uk/tech-media-invest-100/top-100 > > > > This electronic message transmission contains information from OnRelay, > Ltd., that may be confidential or privileged. The information is intended > solely for the recipient and use by any other party is not authorised. If > you are not the intended recipient, be aware that any disclosure, copying, > distribution or use of the contents of this information or any attachment, > is prohibited. If you have received this electronic transmission in error, > please notify us immediately by electronic mail ([email protected]) and > delete this message, along with any attachments, from your computer. > Registered in England No 04006093 ¦ Registered Office 1st Floor, 236 Gray's > Inn Road, London WC1X 8HL > > > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > -- M. Ranganathan _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
