Hello I've set up a small SIPX setup at home, to have a play with it really and to 'unify' incoming calls via disparate means (voip and pstn) so they can be answered on the same set of phones. We're also about to switch to sipX at work.
So, the problem I'm having is that when a call comes in on the PSTN, and rings out and goes to voicemail, there is always a five minute voicemail recorded (with most of it silence) resulting in a 6MB email attachment. Furthermore, the PSTN line is tied up for this five minutes even though the caller has long since hung up. I'm using a Sipura SPA-3000 as the PSTN gateway. It registers as extension 203 and routes calls to 301, which is a call hunt group (rings all phones). After the caller has hung up, and before the PSTN line gets freed up, the Active call list shows no calls active. Does anyone have any ideas how I can fix this so it hangs up the PSTN line when the caller disconnects, and the voicemail stops recording? Note also that if the PSTN call is answered by one of our voip phones, and both parties hang up, then the PSTN line is freed up. Does the Voicemail system need to be told to hang up after a certain amount of silence, eg 10 seconds? Thanks very much Jesse Jesse Reynolds Virtual Artists Pty Ltd - http://www.va.com.au/ Phone: 08 7120 7134 (Adelaide) or 02 9043 2288 (Sydney) Mobile: 0414 669 790
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
