When I set mine up late last year the only issue I had making outbound calls (that wasn't PEBKAC) was the thing didn't think there was a line attached and returned something like 'resource not avaiable' to the invite. I had to change the line voltage threshold down in the international settings box to fix this.
Ah, in the log I see you're using 5060, the FXO side by default is on 5061 (the FXS is on 5060). LIkely that's your issue. -Eric On Feb 18, 2010, at 10:42 AM, [email protected] wrote: > I'm trying to configure a spa3102 for outbound calls only. I know people pull > their hair out over these devices, but I wanted to give it a shot. My only > gateways I've worked with so far are sipxbridge and an audiocodes configred > from within sipx, so I haven't really done too much manual FXO configuration. > I think I may be missing something on the sipx end, because I don't think the > call is ever making it to the spa3102. This is a new setup and has no other > gateways. I added the spa3102 as an unmanaged gateway. I enabled all the > dialing plans and added the gateway. I'm using a polycom 550, Sipx 4.0.4, > bootrom 4.2.1, firmware 3.1.3C split. I would show a siptrace, but the merged > file doesn't really have anything in it. The sipx server is at 10.81.1.5. The > spa3102 is at 10.81.1.6. I tried setting the gateway in sipx to UDP manually > (that is what the spa3102 defaults to) and specifying port 5060, but that > didn't seem to change anything. There are only 2 logs created, so I attached > those. Is there something simple I'm missing? I read through this, > http://sipx-wiki.calivia.com/index.php/HowTo_configure_sipX_to_work_with_FXO/FXS_SIP_Gateways > but I don't see anything that sticks out at me. The only thig I thought I > might need to do is something in authrules.xml, but I'm still not s ure since the text around it refers to FXS and this is FXO. I sort of guess there has to be some some sort of authorization for the spa3102 to know the sipx call can be sent outbound, but I don't know where to do this. Sorry if I'm missing something obvious here. I think the fact that I got an audiocodes 8 port working inbound and outbound with no questions (and clearly not much knowledge on the subject) is a testament to how well sipx is able to configure it! > > Thanks, > Matthew > <sipregistrar.log><sipXproxy.log>_______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
