This ebay auction is starting to look tempting :) http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=350265531020&rvr_id=&crlp=1_263602_263622&UA=%3F*I7&GUID=d74220781250a0e203017dc1fbe784da&itemid=350265531020&ff4=263602_263622
Audio Codes MP-114 FXO VOIP Gateway - NEW US $249.99 On 2/18/2010 11:17 AM, Eric Varsanyi wrote: > For debugging if you set it up to send syslog messages and turn the level all > the way up it sometimes produces semi-useful output. You don't have to have a > syslog server set up to catch it if you can run tcpdump or socat. > > If you can capture traffic to/from the device with tcpdump that's probably > the next step if the syslog stuff doesn't pay off (it kind of sounds like > either its ignoring you or sipxproxy isn't really sending the invite where > you hope its going). > > -Eric Varsanyi > > On Feb 18, 2010, at 11:09 AM, [email protected] wrote: > > >> I have no doubt it is a PEBKAC, I just don't where to look. I changed it to >> 5061 (I now see that setting in the PSTN Line tab on the spa3102). The logs >> look about the same to me. I don't see anything that even tells me it is >> making it to the spa3102. >> >> On 2/18/2010 10:54 AM, Eric Varsanyi wrote: >> >>> When I set mine up late last year the only issue I had making outbound >>> calls (that wasn't PEBKAC) was the thing didn't think there was a line >>> attached and returned something like 'resource not avaiable' to the invite. >>> I had to change the line voltage threshold down in the international >>> settings box to fix this. >>> >>> Ah, in the log I see you're using 5060, the FXO side by default is on 5061 >>> (the FXS is on 5060). LIkely that's your issue. >>> >>> -Eric >>> >>> On Feb 18, 2010, at 10:42 AM, [email protected] wrote: >>> >>> >>> >>>> I'm trying to configure a spa3102 for outbound calls only. I know people >>>> pull their hair out over these devices, but I wanted to give it a shot. My >>>> only gateways I've worked with so far are sipxbridge and an audiocodes >>>> configred from within sipx, so I haven't really done too much manual FXO >>>> configuration. >>>> I think I may be missing something on the sipx end, because I don't think >>>> the call is ever making it to the spa3102. This is a new setup and has no >>>> other gateways. I added the spa3102 as an unmanaged gateway. I enabled all >>>> the dialing plans and added the gateway. I'm using a polycom 550, Sipx >>>> 4.0.4, bootrom 4.2.1, firmware 3.1.3C split. I would show a siptrace, but >>>> the merged file doesn't really have anything in it. The sipx server is at >>>> 10.81.1.5. The spa3102 is at 10.81.1.6. I tried setting the gateway in >>>> sipx to UDP manually (that is what the spa3102 defaults to) and specifying >>>> port 5060, but that didn't seem to change anything. There are only 2 logs >>>> created, so I attached those. Is there something simple I'm missing? I >>>> read through this, >>>> http://sipx-wiki.calivia.com/index.php/HowTo_configure_sipX_to_work_with_FXO/FXS_SIP_Gateways >>>> but I don't see anything that sticks out at me. The only thig I thought I >>>> might need to do is something in authrules.xml, but I'm still no t sure since the text around it refers to FXS and this is FXO. I sort of guess there has to be some some sort of authorization for the spa3102 to know the sipx call can be sent outbound, but I don't know where to do this. Sorry if I'm missing something obvious here. I think the fact that I got an audiocodes 8 port working inbound and outbound with no questions (and clearly not much knowledge on the subject) is a testament to how well sipx is able to configure it! >>>> >>>> Thanks, >>>> Matthew >>>> <sipregistrar.log><sipXproxy.log>_______________________________________________ >>>> sipx-users mailing list [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users >>>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >>>> sipXecs IP PBX -- http://www.sipfoundry.org/ >>>> >>>> >>> >>> >> <sipregistrar.log><sipXproxy.log> >> > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
