Hello, I have a sipx server running on a statically assigned public ip address. I need to support far end NAT for remote users (ATAs behind a home firewall). I have a Grandstream HT 286 that we are experimenting with. Initially I connected the ATA to our office DHCP network, autoconfigured the device from the config server (tftp) and everything works fine. Moving the ATA behind a linksys router and receiving a DHCP assigned NAT'd address the device can still connect to tftp, register with sipx, make outbound calls to the PSTN and internal extensions, but cannot receive calls from internal extensions.
Servers -> <server> -> NAT -> Use STUN System -> Internet Calling -> NAT Traversal -> Enable NAT Traversal <phone> -> SIP -> STUN Server -> "stun01.sipphone.com" This is on Sipx 4.0.4-017289 2009-11-19T18:15:29 ecs-centos5 Thanks, Max _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
