Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Organization: SipXecs Forum X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <43811> Message-ID: <[email protected]>
I'm evaluating 4.0.4 and am trying paging and intercom with Aastra and Grandstream phones. I observe that Paging works properly with both phones (once I set the Grandstream phone option for "Auto Answer by Call Info" (which is not supported via the automatic provisioning in sipXecs). When I use Intercom and call the Aastra phone it answers as expected. When I call the Grandstream phone using Intercom, it does not autoanswer, though, as I reported above, it does autoanswer properly for paging. This would imply that the header "Call-Info: answer-after=0" is not being used for intercom, but is being used for paging. Is this a known issue? I search the forum for this topic and found some discussion but could not find what was decided and/or if the feature will change in an upcoming release. In 4.0.4 there is an "Alert Info" header line for Polycom that can be configured in the Intercom configuration, but it seems to me that using the Call-info line mentioned above would be useful for other phones that support it. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
