Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Organization: SipXecs Forum In-Reply-To: <[email protected]> X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <45314> Message-ID: <[email protected]>
OK, I'm trying to set up Pidgin. I have a "sandbox" DMZ for testing. On this DMZ are the sipXecs server (4.2), A Windows PC (for admin and to run Pidgin), and a phone (Polycom IP550). I did a fresh install of 4.2, told sipXecs to be the DNS and DHCP server, and imported the user and phone list from our "live" sipXecs server (4.0.4) I verified with nslookup that the DNS server is working correctly, and returning SRV records both for SIP and XMPP. I installed Pidgin, and configured the account as: Protocol: XMPP Username: 12 (my extension) Resource: (blank - should something be here?) Password: (My SIP Password from my sipXecs user page) Local Alias: (blank) I left everything on the Advanced tab at the default values. When I try to enable the account, it prompted me to accept the certificate (the info on the certificate shows the correct hostname of the sipXecs server), and then came back as "Not Authorized" I tried: - Changing Username to "mailto:[email protected]"; (gives "Invalid XMPP ID") - Changing Connect Server to the hostname of the sipXecs server (no change in symptoms) - Changing Connect Server to the IP Address of the sipXecs server (no change in symptoms) - Unchecked "Require SSL/TLS" (no change in symptoms) Can someone give me a quick rundown on the proper settings? -- Mike Burden Lynk Systems, Inc e-mail: mailto:[email protected][/email] Phone: 616-532-4985 _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
