Andreas, also try a 'yum update yum'

Older versions of yum had troubles...  specifically with proxy servers.

Mike

> -----Original Message-----
> From: [email protected] [mailto:sipx-users-
> [email protected]] On Behalf Of Andreas (Around the Clock
> Information Systems)
> Sent: Saturday, May 01, 2010 2:30 AM
> To: 'Scott Richesson'
> Cc: [email protected]
> Subject: Re: [sipx-users] Unable to Upgrade to sipXecs 4.2 using YUM
> 
> Dear Mr. Richesson,
> 
>       You're a genius!  The final solution wasn't quite as simple as
> you
> suggested, but it did lead me down a path that ultimately resolved the
> issue.  Here were the steps I performed to finally be able to upgrade
> to
> v4.2:
> 
> 1.)  From the ISA Server Management Interface
>       a.)  Server Name --> Configuration --> General --> Define HTTP
> Compression Preferences
>       b.)  Settings Tab --> Removed all Network Elements
>       c.)  Content Types Tab --> Changed Radio Button from "Compress
> all
> content types except selected" to "Compress the selected content types
> only"
> with NONE of the check boxes below that selected
>       d.)  Content Inspection Tab --> Unchecked the box for
"Decompress
> incoming packets. . ."
>       e.)  Clicked OK
> 2.)  yum update sipXecs = still no joy. . .
> 3.)  Back to the ISA Server Management Interface
>       a.)  Server Name --> Configuration --> Cache --> Cache Rules -->
> Default Rule --> Properties
>       b.)  HTTP Tab --> Unchecked "Enable HTTP caching"
>       c.)  FTP Tab --> Unchecked "Enable FTP caching"
> 4.)  yum update sipXecs = still no joy. . .
> 5.)  yum clean all --> restarted CentOS server
> 6.)  Stopped and restarted the ISA Firewall Service
> 7.)  yum makecache
> 8.)  yum update sipXecs = Success (finally) !!!  With one exception
> noted
> below
>       a.)  One update error (edited for the sake of brevity):
> 
> Running Transaction
> -------------------------------  SNIP
> --------------------------------------
> 
>       Updating       : sipxconfig-ftp
> 9/78
> 
> error: %post(sipxconfig-ftp-4.2.0-018575.i386) scriptlet failed, exit
> status
> 1
> 
>       Updating       : sipxconfig-tftp
> 10/78
> 
> -------------------------------  SNIP
> --------------------------------------
> 
> At some point I'll probably start another thread to determine if this
> is an
> error that I need to address.  Thanks again for leading me in the
right
> direction!
> 
> Cheers!
> 
> Andreas
> Systems Engineer
> Around the Clock Information Systems
> 
> 
> -----Original Message-----
> From: Andreas (Around the Clock Information Systems)
> [mailto:[email protected]]
> Sent: Friday, April 30, 2010 3:47 PM
> To: 'Scott Richesson'
> Cc: '[email protected]'
> Subject: RE: [sipx-users] Unable to Upgrade to sipXecs 4.2 using YUM
> 
> See my reply below in-line with yours. . .
> 
> Thank you,
> 
> Andreas
> Systems Engineer
> Around the Clock Information Systems
> 
> 
> -----Original Message-----
> From: Scott Richesson [mailto:[email protected]]
> Sent: Friday, April 30, 2010 3:29 PM
> To: Andreas (Around the Clock Information Systems);
> [email protected]
> Subject: RE: [sipx-users] Unable to Upgrade to sipXecs 4.2 using YUM
> 
> Do you use MS ISA Server for your firewall/proxy?
> 
> ---
> YES
> ---
> 
> I've found out that if you turn on HTTP compression on the ISA server,
> things go bonkers between it and the sipfoundry.org server when you do
> a yum
> update.
> 
> ----------------
> Interesting. . .
> ----------------
> 
> Something is not quite right with the HTTP headers being passed back
> and
> forth, because ISA will actually uncompress the gz file before
> returning it
> to the sipx server.
> 
> Solution: temporarily turn off compression on the ISA server, then
> clear the
> cache on the ISA server.
> 
>
-----------------------------------------------------------------------
> -----
> --------------
> I'll try that later tonight and report back with my findings.  Thank
> you for
> your reply!!!
>
-----------------------------------------------------------------------
> -----
> --------------
> 
> 
> Scott Richesson
> Cincinnati Fan
> 
> -----Original Message-----
> From: Andreas (Around the Clock Information Systems)
> [mailto:[email protected]]
> Sent: Friday, April 30, 2010 3:14 PM
> To: [email protected]
> Subject: [sipx-users] Unable to Upgrade to sipXecs 4.2 using YUM
> 
> Dear sipXecs Users, Experts and Developers,
> 
>       I've been trying to upgrade from sipXecs version 4.0.1-015823 to
> 4.2
> for over a week now and I get the following error every time:
> 
>
http://sipxecs.sipfoundry.org/pub/sipXecs/LatestStable/CentOS/5/i386/RP
> M/rep
> odata/primary.xml.gz: [Errno -1] Metadata file does not match checksum
> Trying other mirror.
> Error: failure: repodata/primary.xml.gz from sipxecs-stable: [Errno
> 256] No
> more mirrors to try.
> 
>       I've searched the Internets for possible solutions and tried
them
> all to no avail.  Below I've included the output of one of about 100
> different SSH sessions to illustrate in more detail what I've tried as
> well
> as the results from the attempt.  Any and all suggestions at this
point
> would be welcomed.
> 
> ==================================================================
>                               Start SSH Session
> ==================================================================
> 
> [r...@neon ~]# yum update sipxecs
> Loaded plugins: downloadonly, fastestmirror Loading mirror speeds from
> cached hostfile
>  * addons: pubmirrors.reflected.net
>  * base: mirror.vcu.edu
>  * extras: www.gtlib.gatech.edu
>  * updates: www.gtlib.gatech.edu
> sipxecs-stable/primary
> | 253 kB     00:00
>
http://sipxecs.sipfoundry.org/pub/sipXecs/LatestStable/CentOS/5/i386/RP
> M/rep
> odata/primary.xml.gz: [Errno -1] Metadata file does not match checksum
> Trying other mirror.
> Error: failure: repodata/primary.xml.gz from sipxecs-stable: [Errno
> 256] No
> more mirrors to try.
> 
> [r...@neon ~]# yum clean all
> Loaded plugins: downloadonly, fastestmirror Cleaning up Everything
> Cleaning
> up list of fastest mirrors
> 
> [r...@neon ~]# yum makecache
> Loaded plugins: downloadonly, fastestmirror Determining fastest
mirrors
>  * addons: yum.singlehop.com
>  * base: centos.secsup.org
>  * extras: mirror.team-cymru.org
>  * updates: mirror.cisp.com
> Webmin                                              |  951 B     00:00
> Webmin/filelists                                    | 2.0 MB     00:01
> Webmin/other                                        | 1.6 kB     00:00
> Webmin/primary                                      | 6.6 kB     00:00
> addons                                              |  951 B     00:00
> addons/filelists                                    |  194 B     00:00
> addons/other                                        |  189 B     00:00
> addons/primary                                      |  201 B     00:00
> base                                                | 2.1 kB     00:00
> base/filelists_db                                   | 3.3 MB     00:19
> base/other_db                                       | 7.9 MB     00:45
> base/group                                          | 920 kB     00:05
> base/primary_db                                     | 1.6 MB     00:09
> extras                                              | 2.1 kB     00:00
> extras/filelists_db                                 | 195 kB     00:01
> extras/other_db                                     | 430 kB     00:02
> extras/group                                        | 9.7 kB     00:00
> extras/primary_db                                   | 180 kB     00:01
> sipxecs-stable                                      |  951 B     00:00
> sipxecs-stable/filelists                            | 1.3 MB     00:02
>
http://sipxecs.sipfoundry.org/pub/sipXecs/LatestStable/CentOS/5/i386/RP
> M/rep
> odata/filelists.xml.gz: [Errno -1] Metadata file does not match
> checksum
> Trying other mirror.
> updates                                             | 1.9 kB     00:00
> updates/filelists_db                                | 3.0 MB     00:17
> updates/other_db                                    | 9.8 MB     00:56
> updates/primary_db                                  | 616 kB     00:03
> Webmin                              45/45
> sipxecs-stable/primary                              | 253 kB     00:00
>
http://sipxecs.sipfoundry.org/pub/sipXecs/LatestStable/CentOS/5/i386/RP
> M/rep
> odata/primary.xml.gz: [Errno -1] Metadata file does not match checksum
> Trying other mirror.
> Error: failure: repodata/primary.xml.gz from sipxecs-stable: [Errno
> 256] No
> more mirrors to try.
> [r...@neon ~]#
> 
> ==================================================================
>                               End SSH Session
> ==================================================================
> 
> I'm using the sipxecs.repo from
> http://track.sipfoundry.org/secure/attachment/21991/sipxecs.repo
> 
> Thanks in advance :-)
> 
> Andreas
> Systems Engineer
> Around the Clock Information Systems
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> sipx-users mailing list [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users
> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
> sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/

Reply via email to