I have a voip.ms in the event I become paddle-less. I would keep a copy of the current AC config. Upgrade to 5.6 and let sipx generate a config and it it does not work a line by line compare will be the best first step.
I don;t mess with the AC's, i prefer another that i find works well for me. I know from posts upgrading the AC firmware can sometimes result in a lot of issues, so being able to revert firmware and upload you old config is a must. On Fri, May 7, 2010 at 6:36 PM, Norman Branitsky < [email protected]> wrote: > On 10-05-07 3:35 PM, Tony Graziano wrote: > > I would compare the config from before after. > > The thing is that I made no changes to the AudioCodes between 4.0.4 and > 4.2. > I did not install the configuration generated by 4.2. > > Upgrading to 5.8 puts you into a version not many people have seen, so if > you want to add insult to injury when > AC adds functions not supported and you can't find anyone to answer, > then... go ahead? > > I was asking about installing 5.6 because I have that firmware and it is > supported. > > I was thinking of creating an account on voip.ms first because the > AudioCodes is my only external connection > and if it stopped working I would be up the creek without a paddle. > > On Fri, May 7, 2010 at 3:31 PM, Norman Branitsky < > [email protected]> wrote: > >> On 10-05-05 10:24 PM, Norman Branitsky wrote: >> >> Commenting on my own post: >> I called from one extension to another and the voicemail recorded over >> 20 seconds and >> did not disconnect. So the Gateway appears to be the culprit. >> Gerald Drouillard said he was having the same problem with a >> google/gizmo gateway. >> So, should I upgrade the AudioCodes firmware? >> > Since upgrading from 4.0.4 to 4.2 this past Sunday, >> > I have received many complaints that callers are disconnected >> > after only a short time while recording a voicemail message. >> > I just tested it myself. The recordings consistently disconnect after >> > just 10 seconds. >> > >> > I'm using the same AudioCodes MP-118 FXO device running 5.2 firmware >> > that I have been using since 2007. >> > I have firmware version 5.6 available but I didn't want to install it at >> > the same time I was upgrading to 4.2. I also have version 5.8 - my >> > supplier says he can't find any information about the existence of 6.0 >> > even though sipXecs claims to support 6.0. >> > >> > Is this an AudioCodes problem? Should I upgrade to 5.6? 5.8? >> > If so, why did it just show up after switching from 4.0.4 to 4.2? >> > Should I call directly from one extension to another and see if the >> > voicemail disconnects as the AudioCodes gateway wouldn't be involved >> > in this connection? >> > >> > I spent a lot of time comparing the existing AudioCodes configuration to >> > the one I built in the Gateway Management section of sipconfig 4.2. >> > There appear to be some differences between the current settings and the >> > sipconfig defaults. >> > > -- > Norman Branitsky +1 416.798.7948 > Cherniak Software Development Corporation Fax: +1 416.798.0948 > 509-2001 Sheppard Avenue East [email protected] > Toronto, ON M2J 4Z8 sip:[email protected] > Canada http://www.CherniakSoftware.com > > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ Why do mathematicians always confuse Halloween and Christmas? Because 31 Oct = 25 Dec.
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
