On 05/15/2010 11:54 AM, Josh Patten wrote: When using SLA/BLA with an Audiocodes Mediant 1000 I noticed that when placing calls on hold and retrieving them on different phones the caller ID changes from whatever came over the PRI to the following format: 10000000021 where 1 is the trunk number and 21 is the B channel. Is there any way to keep the original CLID when moving calls among shared lines? I've tried turning on PAssertedIdentity and that didn't do anything. _______________________________________________ sipx-users mailing list [email protected]<mailto:[email protected]> List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ The sequential CLID looks like the FirstPhoneNumber configured in the Mediant1000 (usually defaulted to Unknown00 by sipXconfig). Perhaps this is set to 100000000 on your system, the Mediant1000 then automatically appends the channel number to create the CLID. According to the Mediant documentation this CLID would only be used when no other CLID is defined, but not sure why this is happening in your case. Dave.
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
