I think if you followed the advice you were given your success would be easier.
Good luck. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: [email protected] <[email protected]> Sent: Thu Jul 08 14:03:28 2010 Subject: Re: [sipx-users] Problems with Audiocodes MP114 gateway Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Organization: SipXecs Forum In-Reply-To: <[email protected]> X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <48871> Message-ID: <[email protected]> Yes sipX 4.0.4 And the firmware in my audiocodes is 5.6 but under the configuration for my audiocodes device in SipX Im only able to select from firmwares 5.0 to 5.4 not the 5.6 firmware the device actually has. Im going to try to manually configure it instead of trying to get SipX to configure it. I resetted the device and found that it did not reset to what I believe should be default factory settings. It now has the ip address 192.168.0.244 and I cant access it with the default admin admin user/pass. Any ideas why that would happen? Thanks for your help. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
