On 7/22/10 2:34 PM, Matthew Kitchin (public/usenet) wrote:
On 7/22/2010 10:59 AM, Michael Scheidell wrote:
On 7/22/10 11:31 AM, Matthew Kitchin (public/usenet) wrote:
Yes. I'm using Verizon. They say they are using Broadsoft. I haven;t
experienced anything like what you described. The first level techs
were very confused though. They didn't have a clue.
We don't authenticate at all. It is all done by IP. I had to tell
them I was running Nortel SCS.
what settings did you need on the sipx side?
(ports, in, out, etc?)
p-asserted identity?
right now, inbound calls work (sorta) I put them on hold on a poly,
and it hangs up. I put them on hold on a cisco, hold works, but
unhold hangs up.
outbound calls, one way audio (i guess, sip trace doesn't even show
it connecting ANY audio. they claim that they see me asking for G.722
(from my poly, or sipx bridge)
They are sending calls in on 5060. They said that could not be
changed. I had no choice but to use Verizon for this setup.
On our router, we translate 5060 -> 5080 on inbound traffic.
won't that break remote users? and/or sip inbound?
Outbound port is 5070
ITSP settings:
Username: 10 digit DID
'Use public address for call setup'- This is unchecked. IT did not
work with this checked.
'Use default asserted identity' - This is checked
We have no firewall or IP NAT'ing in place on this connection. It is a
private connection to Verizon. On the NAT tab, I have 'Specify an IP
address', becuase I had to pick something. On 4.0.4 I have the
hostname of the Verizon SIP server put in for 'Public IP address'. I
know this is not correct, but I had to put something there. on 4.2.x,
it will not allow a hostname, so I put the IP of the Verizon SIP
server I connect to. Public port is set to 5060.
It was trial and error with several of these settings, but they have
worked well for me.
do you use the internal sipxbridge as your SBC, or did you use their's?
they are claiming that port 5080 is NON STANDARD, and they only support
standards.
--
Michael Scheidell, CTO
Phone: 561-999-5000, x 1259
> *| *SECNAP Network Security Corporation
* Certified SNORT Integrator
* 2008-9 Hot Company Award Winner, World Executive Alliance
* Five-Star Partner Program 2009, VARBusiness
* Best in Email Security,2010: Network Products Guide
* King of Spam Filters, SC Magazine 2008
______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.secnap.com/products/spammertrap/
______________________________________________________________________
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
