If you are only able to dial 0 and 101 you more than likely aren't registered.
I think the trick with the Aastra phones for a long time has been to set the SIP port to 0 instead of 5060. This forces the phone to utilize SRV records. Mike On Fri, Aug 13, 2010 at 4:10 PM, Stiles Watson <[email protected]>wrote: > Sorry for the re-post, but I received no response from the web forum so > I'm sending this to the mailing list in hopes of getting help. > > I'm new to SipX and have completed a fresh install of 4.2.1 from the > CentOS/SipX iso. I've successfully setup a kphone soft phone - so far so > good. I'm trying to get an Aastra 6730i hard phone setup. Receiving a > call from the soft phone works flawlessly. Dialing 0 or 101 works from > the 6730i and I can both listen to and record vmail from it as well. I > can not, however, call the soft phone. When I try, I get a "Call Failed" > error. The failed call is logged in SipX under Diagnostics-->Call Detail > Records. > > Since I am only trying to perform a ext to ext call, I am not going out > to the PSTN, nor am I going through a ITSP. Since everything is attached > to the same sub-net, there are no firewall issues nor are there NAT > issues - at least as far as I understand things there should not be. > > Since the 6730i is not supported through the GUI, I did the following: > > * Created a new user > * Chose Aastra 53i from the new phone drop-down. > * Added the phone to the user > * Manually configured the 6730i with user ext/sip password info via > its web gui. > * Rebooted the phone > * Checked registration - line 1 & line 2 registered successfully > > Anyone have any suggestions on how to get 6730i to dial another ext > other than 0 & 101? > > Stiles > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- There are 10 kinds of people in this world, those who understand binary and those who don't. [email protected] blog: http://www.sipxecs.info call: sip:[email protected] <sip%[email protected]>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
