No it doesn't seem to complete, the remote office phone never rings. I see the REFER come into the gateway from sipx, the gateway follows with a NOTIFY back to sipx, then a 202 Accepted. I feel like I should see an INVITE from the gateway in there after the REFER, but I never do.
Tony, For small office FXO what would you recommend? Thanks! Kyle On 09/01/2010 01:23 PM, Tony Graziano wrote: > I don't use AC gateways if I can help it. ;>) > > You never mentioned if it successfully connects the call. It's an > audio or MOH issue for sure. Have you done anything differently in > this system regarding MOH? > > > On Wed, Sep 1, 2010 at 2:45 PM, Kyle Haefner<[email protected]> > wrote: >> Hi All, >> >> I have spXecs 4.2.1 and an Audiocodes MP114 FXO device (version 5.8) >> for a remote office. When I call into the FXO device from the PSTN to >> an auto-attendant, I can push a digit and I hear "Please hold while I >> transfer your call" then dead air and no phones ring in the remote >> office. If I dial in from another internal extension (ie a polycom) >> to the auto-attendant then it transfers as expected. Anybody see this >> before? >> >> Kyle >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
