Kyle I don't think this is a known issue. I assume there is no NAT or else between the gateway and sipXecs. Firmware 5.8 should be ok - there are still a few knows issues with 6.0. Best thing to do is to capture a snapshot and trace.
It sounds like the AA answers, but the transfer fails. Mike will likely be able to try this. --martin > -----Original Message----- > From: [email protected] [mailto:sipx-users- > [email protected]] On Behalf Of Kyle Haefner > Sent: Wednesday, September 01, 2010 2:46 PM > To: sipx-users > Subject: [sipx-users] Audiocodes MP114 FXO Call Transfers > > Hi All, > > I have spXecs 4.2.1 and an Audiocodes MP114 FXO device (version 5.8) > for a remote office. When I call into the FXO device from the PSTN to > an auto-attendant, I can push a digit and I hear "Please hold while I > transfer your call" then dead air and no phones ring in the remote > office. If I dial in from another internal extension (ie a polycom) > to the auto-attendant then it transfers as expected. Anybody see this > before? > > Kyle > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
