> If you are using CALLCENTRIC (my advice is to NOT use them, but sometimes > people have to), they DO NOT send the DID number, they send the account > number, so typically I would suggest putting the account number in the user > alias field.
Ah. That makes sense. In my case, it was never picked up by the dial plan. > OR setup the gateway according to the ROUTE BY TO HEADER... When I did this, I received busy signal. I suppose ROUTE BY TO HEADER means routing by phone taken from the header rather than by account number. On Mon, Oct 11, 2010 at 6:14 AM, Tony Graziano <[email protected]> wrote: > Where is the call originating from? > DID's do not need a dial plan. > If you are using CALLCENTRIC (my advice is to NOT use them, but sometimes > people have to), they DO NOT send the DID number, they send the account > number, so typically I would suggest putting the account number in the user > alias field. > OR setup the gateway according to the ROUTE BY TO HEADER... > > On Mon, Oct 11, 2010 at 6:09 AM, Roman Gelfand <[email protected]> wrote: >> >> could you give me an example of a did dial plan which would route to >> internal phone number 201? >> >> On Mon, Oct 11, 2010 at 5:10 AM, Tony Graziano >> <[email protected]> wrote: >> > Typically the dial plan is used for calls made from sipx to the pstn. >> > It sounds like the dial plan you are creating loops back to sip as a >> > locally >> > dialed number, in which case you "would not" use a gateway at all so it >> > would process, or you would get a LOOP DETECTED message (which is >> > correct >> > handling if you are dialing 201 internally but sending to a ITSP >> > gateway). >> > >> > On Sun, Oct 10, 2010 at 9:50 PM, Roman Gelfand <[email protected]> >> > wrote: >> >> >> >> I did create dial plan. But I am getting "SIP/2.0 482 Loop Detected >> >> with 2 hops ago" >> >> >> >> Here is what I changed from single number ITSP trunk configuration... >> >> >> >> 1. Removed ITSP caller id info >> >> 2. Removed SBC SIP Incoming call destination >> >> 3. Added custom dial plan for the ITSP gateway where dialed number >> >> 732370 and any number of trailing digits which results in dial 201. >> >> >> >> I went over this. I don't know what else needs to be done here. >> >> >> >> Any help is aprpeciated. >> >> >> >> On Sun, Oct 10, 2010 at 7:39 PM, Tony Graziano >> >> <[email protected]> wrote: >> >> > (System>Dialplans). >> >> > Choose the call type, add the gateway to use, and save. >> >> > (or create custom dialplans) >> >> > >> >> > On Sun, Oct 10, 2010 at 7:01 PM, Tony Graziano >> >> > <[email protected]> wrote: >> >> >> >> >> >> You specify the gateway. The wiki has this well documented. >> >> >> ============================ >> >> >> Tony Graziano, Manager >> >> >> Telephone: 434.984.8430 >> >> >> Fax: 434.984.8431 >> >> >> >> >> >> Email: [email protected] >> >> >> >> >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> >> >> Telephone: 434.984.8426 >> >> >> Fax: 434.984.8427 >> >> >> >> >> >> Helpdesk Contract Customers: >> >> >> http://www.myitdepartment.net/gethelp/ >> >> >> >> >> >> ----- Original Message ----- >> >> >> From: [email protected] >> >> >> <[email protected]> >> >> >> To: Discussion list for users of sipXecs software >> >> >> <[email protected]> >> >> >> Sent: Sun Oct 10 17:54:08 2010 >> >> >> Subject: [sipx-users] SIP Trunking with Multiple Lines >> >> >> >> >> >> Where do you specify the line to use to call out. >> >> >> _______________________________________________ >> >> >> sipx-users mailing list >> >> >> [email protected] >> >> >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >> > >> >> > >> >> > >> >> > -- >> >> > ====================== >> >> > Tony Graziano, Manager >> >> > Telephone: 434.984.8430 >> >> > sip: [email protected] >> >> > Fax: 434.984.8431 >> >> > >> >> > Email: [email protected] >> >> > >> >> > LAN/Telephony/Security and Control Systems Helpdesk: >> >> > Telephone: 434.984.8426 >> >> > sip: [email protected] >> >> > Fax: 434.984.8427 >> >> > >> >> > Helpdesk Contract Customers: >> >> > http://www.myitdepartment.net/gethelp/ >> >> > >> >> > Why do mathematicians always confuse Halloween and Christmas? >> >> > Because 31 Oct = 25 Dec. >> >> > >> >> > >> >> > _______________________________________________ >> >> > sipx-users mailing list >> >> > [email protected] >> >> > List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >> > >> >> _______________________________________________ >> >> sipx-users mailing list >> >> [email protected] >> >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > >> > >> > >> > -- >> > ====================== >> > Tony Graziano, Manager >> > Telephone: 434.984.8430 >> > sip: [email protected] >> > Fax: 434.984.8431 >> > >> > Email: [email protected] >> > >> > LAN/Telephony/Security and Control Systems Helpdesk: >> > Telephone: 434.984.8426 >> > sip: [email protected] >> > Fax: 434.984.8427 >> > >> > Helpdesk Contract Customers: >> > http://www.myitdepartment.net/gethelp/ >> > >> > Why do mathematicians always confuse Halloween and Christmas? >> > Because 31 Oct = 25 Dec. >> > >> > >> > _______________________________________________ >> > sipx-users mailing list >> > [email protected] >> > List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.984.8431 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > Why do mathematicians always confuse Halloween and Christmas? > Because 31 Oct = 25 Dec. > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
