Re: [sipx-users] Polycom 8002

[Matthew Kitchin (public/usenet)]

I worked with Polycom for a couple of months on getting the Spectralink 8020 to work. They had to build some new firmwares to get the 8020 working properly with either sipx 4.2.1 or 4.4. These were problems that didn't exist in 4.0.4. We eventually got everything working. There is one lingering issue, but it appears to be related to my ITSP. I would try contacting their support and asking if they have a new firmware for your model. Also, I highly recommend the handset administration tool if they offer that for the 8002. I don;t think I ever would have gotten it working properly if I had to build all those config files by hand. On 5/13/2011 10:25 AM, Mark Wood wrote: Trying to configure a Polycom 8002 Wifi set on sipx with a Cisco 1130AG ap. Figured out that the config files need to be edited down to their smallest essentials instead of just commenting out the unneeded parts. Phone pulls the config files but doesn’t show in diagnostics->registrations. Has anyone got experience with this setup?   Thanks, Mark W. Wood office: (760)202-0224   X2010 www.redphonetech.com         _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/

_______________________________________________
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/