See in-line... On Sun, Jun 12, 2011 at 12:49 PM, Dragan Jurkovic <[email protected]>wrote:
> Hi, > > I have two sites connected via VPN and site-to-site > gateways/dialplan. Site to site dialing works like a charm. Both sites > have Audiocodes gateways (Mediant 1000PRI and MP118 FXO on other site) > as gateways to PSTN. I am wondering is it possible to use remote > site's gateway to place long distance calls? For example can I define > remote gateway on local site and create dial plan which will use that > gateway? This should work as long as the gateway knows how to route back to you... Try to ping it to verify... > What I tried is to define a gateway (as an unmanaged one > pointing to the remote Mediant one) and then created dial plan as > prefix 1NNN and 7 digits to dial out as NNN and dialed 7 digits using > defined gateway but I am getting fast busy signal. Sipviewer shows 407 > registration requests coming from remote site. This happens if I try > to use either remote Mediant or site-to-site gateway. I even tried to > define same user on remote site but no avail. > Has anyone ever tried this? > > Thank you in advance, > Dragan > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher eZuce Director of Technical Services O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
