Mine is a relatively high end Cisco. I don't believe the problem is my switch. -----Original Message----- From: Dragan Jurkovic <[email protected]> Sender: [email protected] Date: Thu, 16 Jun 2011 16:00:26 To: <[email protected]>; Discussion list for users of sipXecs software<[email protected]> Subject: Re: [sipx-users] Problem with internal calls Polycom to Polycom -PRACK missing
For me it happens even if phones are plugged directly to Netgear GS748TP switch. When I restarted the switch problem went away for a while, but it seems it is back. Could it be faulty switch? Dragan On Thu, Jun 16, 2011 at 3:27 PM, Matthew Kitchin (usenet/public) <[email protected]> wrote: > Me too! > It happened on 4.2.1 with pcom firmware 3.2.4 and still with 4.4.0 and 3.2.5. > After going through some traces, we replaced an old cat 5 drop with several > cross connects with a cat 6 home run it seems. To have helped. > -----Original Message----- > From: Tony Graziano <[email protected]> > Sender: [email protected] > Date: Thu, 16 Jun 2011 12:29:05 > To: Discussion list for users of sipXecs > software<[email protected]> > Reply-To: Discussion list for users of sipXecs software > <[email protected]> > Subject: Re: [sipx-users] Problem with internal calls Polycom to Polycom - > PRACK missing > > On Thu, Jun 16, 2011 at 12:20 PM, Dragan Jurkovic <[email protected]> wrote: >> Hi all, >> >> I have a strange problem with internal calls between Polycom phones >> (IP 331 boot rom 4.1.3, SIP 3.2.4.B). sipXecs is 4.4 with all latest >> patches applied. >> When calling from one station to another an attempt to answer incoming >> call will result in following: screen still shows Ignore, Answer, More >> options, ringing stops, and caller's phone will show that call is >> answered. The only way to stop the call on called phone is to go to >> reject option. This happens randomly but very often. >> Attached logs show that PRACK is not issued in failed call case. >> >> Is this Polycom or sipXecs issue? Has anyone stumbled on this. >> >> What is more puzzling - we have remote site with identical >> configuration and this never happens there! >> > I have also seen this with firmware 3.2.5 on a limited basis but have > not tracked it down. It also happens on incoming trunk calls. In the > one instance where it is happening we're in the process of replacing a > crappy switch though, and I wanted to get that out of the way before I > pointed fingers. >_______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ >_______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
