No BLAs.

On Thu, Jun 16, 2011 at 4:49 PM, Nathaniel Watkins
<[email protected]> wrote:
> Are you using BLA (shared lines) on these phones?  I've had some odd issues 
> in the past that were related to certain firmware and using BLA.
>
>
> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Todd Hodgen
> Sent: Thursday, June 16, 2011 4:05 PM
> To: 'Discussion list for users of sipXecs software'; [email protected]
> Subject: Re: [sipx-users] Problem with internal calls Polycom to Polycom 
> -PRACK missing
>
> There are several on this list, including myself, that have been burned by
> Netgear switches.   If resetting your switch fixes a problem, there is an
> issue with the switch, or the power feeding that switch.   Personally, I'd
> replace the switch, and I'd also ensure it is on a quality UPS.
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Dragan Jurkovic
> Sent: Thursday, June 16, 2011 1:00 PM
> To: [email protected]; Discussion list for users of sipXecs software
> Subject: Re: [sipx-users] Problem with internal calls Polycom to Polycom 
> -PRACK missing
>
> For me it happens even if phones are plugged directly to Netgear GS748TP 
> switch. When I restarted the switch problem went away for a while, but it 
> seems it is back. Could it be faulty switch?
>
> Dragan
>
> On Thu, Jun 16, 2011 at 3:27 PM, Matthew Kitchin (usenet/public) 
> <[email protected]> wrote:
>> Me too!
>> It happened on 4.2.1 with pcom firmware 3.2.4 and still with 4.4.0 and
> 3.2.5. After going through some traces, we replaced an old cat 5 drop with 
> several cross connects with a cat 6 home run  it seems. To have helped.
>> -----Original Message-----
>> From: Tony Graziano <[email protected]>
>> Sender: [email protected]
>> Date: Thu, 16 Jun 2011 12:29:05
>> To: Discussion list for users of sipXecs
> software<[email protected]>
>> Reply-To: Discussion list for users of sipXecs software
>>        <[email protected]>
>> Subject: Re: [sipx-users] Problem with internal calls Polycom to
>> Polycom -
>>  PRACK missing
>>
>> On Thu, Jun 16, 2011 at 12:20 PM, Dragan Jurkovic <[email protected]>
> wrote:
>>> Hi all,
>>>
>>>  I have a strange problem with internal calls between Polycom phones
>>> (IP 331 boot rom 4.1.3, SIP 3.2.4.B). sipXecs is 4.4 with all latest
>>> patches applied.
>>> When calling from one station to another an attempt to answer
>>> incoming call will result in following: screen still shows Ignore,
>>> Answer, More options, ringing stops, and caller's phone will show
>>> that call is answered. The only way  to stop the call on called phone
>>> is to go to reject option. This happens randomly but very often.
>>> Attached logs show that PRACK is not issued in failed call case.
>>>
>>>  Is this Polycom or sipXecs issue? Has anyone stumbled on this.
>>>
>>> What is more puzzling - we have remote site with identical
>>> configuration and this never happens there!
>>>
>> I have also seen this with firmware 3.2.5 on a limited basis but have
>> not tracked it down. It also happens on incoming trunk calls. In the
>> one instance where it is happening we're in the process of replacing a
>> crappy switch though, and I wanted to get that out of the way before I
>> pointed fingers.
>> _______________________________________________
>> sipx-users mailing list
>> [email protected]
>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>> _______________________________________________
>> sipx-users mailing list
>> [email protected]
>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1382 / Virus Database: 1513/3707 - Release Date: 06/16/11
>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
> This message and any files transmitted with it are intended only for the 
> individual(s) or entity named. If you are not the intended individual(s) or 
> entity named you are hereby notified that any disclosure, copying, 
> distribution or reliance upon its contents is strictly prohibited. If you 
> have received this in error, please notify the sender, delete the original, 
> and destroy all copies. Email transmissions cannot be guaranteed to be secure 
> or error-free as information could be intercepted, corrupted, lost, 
> destroyed, arrive late or incomplete, or contain viruses. Garrett County 
> Government therefore does not accept any liability for any errors or 
> omissions in the contents of this message, which arise as a result of email 
> transmission.
>
>
>  Garrett County Government,
> 203 South Fourth Street, Courthouse, Oakland, Maryland 21550 
> www.garrettcounty.org
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Reply via email to