Good! On Fri, Sep 9, 2011 at 2:17 PM, Todd Hodgen <[email protected]> wrote:
> With the SPA942, the phones work great. The only issues I'm seeing right > now is Shared Line Appearance not work, WIKI implies it's not supported so > that is okay, and the clock doesn't display correct time - seem to display > GMT, rather than local time. Need to dig into that still. > > MOH, transfer, internal and external calls, Paging, Intercom, all seem to > work as advertised. > > There are some tips for making these work in the WIKI. I didn't use them > initially, and had great results. I tried them later, and had negative > results. I think using those tips is not necessary, and will need to be > reviewed. > > Once I find some more SPA942 for my lab, I'll test in a sterile environment > and update the wiki. > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Gary Luca > Sent: Friday, September 09, 2011 10:57 AM > To: Discussion list for users of sipXecs software > Subject: Re: [sipx-users] SPA502G / SPA504G not receiving inbound calls > > Acutally MoH works fine for internal calls. > > > On Fri, Sep 9, 2011 at 1:20 PM, Michael Picher <[email protected]> wrote: > > yes, expect this and MoH to not work (unless you are using a sip trunk > > with sipXbridge which can inject MoH). But you will not have MoH for > > internal to internal callers... > > Mike > > > > On Fri, Sep 9, 2011 at 1:12 PM, Gary Luca <[email protected]> wrote: > >> > >> And I have a new problem. > >> > >> Shared Line Appearance = fail > >> > >> The line registers no problem but all I get is a flashing red light > >> on the line key and no ability to make or receive calls on that line. > >> > >> And of course the Administrator's Guide is completely useless. > >> > >> Any ideas? > >> > >> > >> > >> On Fri, Sep 9, 2011 at 1:10 PM, Gary Luca <[email protected]> wrote: > >> > I've BEEN configuring them manually. There is no support in sipx > >> > for SPA502G or SPA504G. > >> > > >> > Configured to use UDP = no incoming calls > >> > > >> > And I haven't a clue how I would go about dumping the configuration > >> > off the phone. > >> > > >> > > >> > On Fri, Sep 9, 2011 at 12:36 PM, Douglas Hubler <[email protected]> > >> > wrote: > >> >> On Fri, Sep 9, 2011 at 12:25 PM, Gary Luca <[email protected]> > >> >> wrote: > >> >>> Just for the hell of it I tried using TCP instead of UDP for SIP > >> >>> signalling. And it works no problem. > >> >> > >> >> Can you configure the phone manually to do UDP and get inbound > >> >> calls to work? If so, can you dump the configuration somehow off > >> >> the manually configured phone so we can compare? > >> >> _______________________________________________ > >> >> sipx-users mailing list > >> >> [email protected] > >> >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > >> >> > >> > > >> > > >> > > >> > -- > >> > Gary J. Luca Jr. > >> > > >> > 781-333-8087 > >> > http://www.linkedin.com/in/garylukes > >> > > >> > >> > >> > >> -- > >> Gary J. Luca Jr. > >> > >> 781-333-8087 > >> http://www.linkedin.com/in/garylukes > >> _______________________________________________ > >> sipx-users mailing list > >> [email protected] > >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > > > > > -- > > Michael Picher > > eZuce > > Director of Technical Services > > O.978-296-1005 X2015 > > M.207-956-0262 > > @mpicher <http://twitter.com/mpicher> > > www.ezuce.com > > > > > > _______________________________________________ > > sipx-users mailing list > > [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > > > -- > Gary J. Luca Jr. > > 781-333-8087 > http://www.linkedin.com/in/garylukes > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1392 / Virus Database: 1520/3886 - Release Date: 09/09/11 > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher eZuce Director of Technical Services O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
