You live...you learn.
On Thu, Sep 8, 2011 at 8:58 PM, Michael Picher <[email protected]> wrote: > I guess next time you'll have your ammunition and just say 'no, there isn't > anything better that works as well...' > > On Thu, Sep 8, 2011 at 8:51 PM, Gary Luca <[email protected]> wrote: >> >> You are preaching to the choir my friend. >> >> I proposed Polycom phones. They wanted a cheaper alternative ("What >> about Cisco phones?") >> >> So I proposed these pieces of crap. They were cheaper. >> >> I was told to go with the more "cost appropriate" option. So here I >> am....bald. >> >> But anyway...Tony is checking it out for me. I'll keep you posted. >> >> -G >> >> On Thu, Sep 8, 2011 at 8:44 PM, Michael Picher <[email protected]> wrote: >> > Cheaper != better... >> > product selection is key to keeping yourself sane and your users happy. >> > You'be probably eaten up in your labor hours any $$ savings. >> > Of course that doesn't help you at the moment. Nor can I other than to >> > suggest you should perform a trace and post that in case some other >> > person >> > who likes pull their hair out has figured it out. >> > Mike >> > On Thu, Sep 8, 2011 at 4:50 PM, Gary Luca <[email protected]> wrote: >> >> >> >> Hello all, >> >> >> >> Don't know if anyone has encountered this issue yet. I've been >> >> searching high and low all day and driving myself crazy trying to >> >> figure out why my brand new Cisco SPA504G and SPA502G phones are able >> >> to make outbound calls with no problem but absolutely will not receive >> >> inbound calls. They are successfully registered to sipx, yet when I >> >> try to call any of the extensions, it goes straight to voicemail. >> >> >> >> It is absolutely infuriating that I can't auto provision these from >> >> sipx and have to manually configure them. I know that Cisco products >> >> are known for being unnecessarily complicated to configure, but this >> >> is just insane. If only I could have found Polycom phones that were >> >> cheaper than these POSes. >> >> >> >> sipx is 4.4.0 >> >> Firmware on the phones is 7.4.3a >> >> >> >> Any guidance would be greatly appreciated. >> >> >> >> Thanks >> >> >> >> -Gary >> >> >> >> -- >> >> Gary J. Luca Jr. >> >> >> >> 781-333-8087 >> >> http://www.linkedin.com/in/garylukes >> >> _______________________________________________ >> >> sipx-users mailing list >> >> [email protected] >> >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > >> > >> > >> > -- >> > Michael Picher >> > eZuce >> > Director of Technical Services >> > O.978-296-1005 X2015 >> > M.207-956-0262 >> > @mpicher <http://twitter.com/mpicher> >> > www.ezuce.com >> > >> > >> > _______________________________________________ >> > sipx-users mailing list >> > [email protected] >> > List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > >> >> >> >> -- >> Gary J. Luca Jr. >> >> 781-333-8087 >> http://www.linkedin.com/in/garylukes >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > -- > Michael Picher > eZuce > Director of Technical Services > O.978-296-1005 X2015 > M.207-956-0262 > @mpicher <http://twitter.com/mpicher> > www.ezuce.com > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Gary J. Luca Jr. 781-333-8087 http://www.linkedin.com/in/garylukes _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
