And I have a new problem. Shared Line Appearance = fail
The line registers no problem but all I get is a flashing red light on the line key and no ability to make or receive calls on that line. And of course the Administrator's Guide is completely useless. Any ideas? On Fri, Sep 9, 2011 at 1:10 PM, Gary Luca <[email protected]> wrote: > I've BEEN configuring them manually. There is no support in sipx for > SPA502G or SPA504G. > > Configured to use UDP = no incoming calls > > And I haven't a clue how I would go about dumping the configuration > off the phone. > > > On Fri, Sep 9, 2011 at 12:36 PM, Douglas Hubler <[email protected]> wrote: >> On Fri, Sep 9, 2011 at 12:25 PM, Gary Luca <[email protected]> wrote: >>> Just for the hell of it I tried using TCP instead of UDP for SIP >>> signalling. And it works no problem. >> >> Can you configure the phone manually to do UDP and get inbound calls >> to work? If so, can you dump the configuration somehow off the >> manually configured phone so we can compare? >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > Gary J. Luca Jr. > > 781-333-8087 > http://www.linkedin.com/in/garylukes > -- Gary J. Luca Jr. 781-333-8087 http://www.linkedin.com/in/garylukes _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
