pfsense does floating rules but my guess is not all of the ports are
properly specified. Is this a 2.0 install? If so, you might want my new
wizard for setting that up.

On Fri, Sep 23, 2011 at 10:57 AM, Max DiOrio <[email protected]> wrote:

>  I was hoping someone can take a quick look at my QoS settings and let me
> know if anything is off.  My users are complaining that they’re having
> choppy audio and an occasional dropped call.  Our ITSP/ISP says everything
> is fine on their end.  The QoS settings were tweaked by pfSense.  We have a
> DSL connection that’s supposed to be 9/1.5****
>
> ** **
>
> I’m just trying to figure out a way to pin the troubles back on the
> ITSP/ISP.****
>
> ** **
>
> <shaper>****
>
>            <queue>****
>
>                 <interface>lan</interface>****
>
>                 <name>lan</name>****
>
>                 <scheduler>HFSC</scheduler>****
>
>                 <bandwidth/>****
>
>                 <bandwidthtype/>****
>
>                 <enabled>on</enabled>****
>
>                 <queue>****
>
>                      <name>qLink</name>****
>
>                      <interface>lan</interface>****
>
>                      <qlimit>500</qlimit>****
>
>                      <priority>2</priority>****
>
>                      <bandwidth>20</bandwidth>****
>
>                      <bandwidthtype>%</bandwidthtype>****
>
>                      <enabled>on</enabled>****
>
>                      <default>on</default>****
>
>                      <ecn>on</ecn>****
>
>                 </queue>****
>
>                 <queue>****
>
>                      <name>qInternet</name>****
>
>                      <interface>lan</interface>****
>
>                      <bandwidth>9</bandwidth>****
>
>                      <bandwidthtype>Mb</bandwidthtype>****
>
>                      <enabled>on</enabled>****
>
>                      <ecn>on</ecn>****
>
>                      <linkshare3>9Mb</linkshare3>****
>
>                      <linkshare>on</linkshare>****
>
>                      <upperlimit3>9Mb</upperlimit3>****
>
>                      <upperlimit>on</upperlimit>****
>
>                      <queue>****
>
>                            <name>qACK</name>****
>
>                            <interface>lan</interface>****
>
>                            <priority>6</priority>****
>
>                            <bandwidth>19.48</bandwidth>****
>
>                            <bandwidthtype>%</bandwidthtype>****
>
>                            <enabled>on</enabled>****
>
>                            <ecn>on</ecn>****
>
>                            <linkshare3>19.48%</linkshare3>****
>
>                            <linkshare>on</linkshare>****
>
>                      </queue>****
>
>                      <queue>****
>
>                            <name>qVoIP</name>****
>
>                            <interface>lan</interface>****
>
>                            <priority>7</priority>****
>
>                            <bandwidth>32</bandwidth>****
>
>                            <bandwidthtype>Kb</bandwidthtype>****
>
>                            <enabled>on</enabled>****
>
>                            <ecn>on</ecn>****
>
>                            <realtime3>240Kb</realtime3>****
>
>                            <realtime>on</realtime>****
>
>                      </queue>****
>
>                 </queue>****
>
>            </queue>****
>
>            <queue>****
>
>                 <interface>wan</interface>****
>
>                 <name>wan</name>****
>
>                 <scheduler>HFSC</scheduler>****
>
>                 <bandwidth>1572</bandwidth>****
>
>                 <bandwidthtype>Kb</bandwidthtype>****
>
>                 <enabled>on</enabled>****
>
>                 <queue>****
>
>                      <name>qACK</name>****
>
>                      <interface>wan</interface>****
>
>                      <priority>6</priority>****
>
>                      <bandwidth>19.602</bandwidth>****
>
>                      <bandwidthtype>%</bandwidthtype>****
>
>                      <enabled>on</enabled>****
>
>                      <ecn>on</ecn>****
>
>                      <linkshare3>19.602%</linkshare3>****
>
>                      <linkshare>on</linkshare>****
>
>                 </queue>****
>
>                 <queue>****
>
>                      <name>qDefault</name>****
>
>                      <interface>wan</interface>****
>
>                      <priority>3</priority>****
>
>                      <bandwidth>9.801</bandwidth>****
>
>                      <bandwidthtype>%</bandwidthtype>****
>
>                      <enabled>on</enabled>****
>
>                      <default>on</default>****
>
>                      <ecn>on</ecn>****
>
>                 </queue>****
>
>                 <queue>****
>
>                      <name>qVoIP</name>****
>
>                      <interface>wan</interface>****
>
>                      <priority>7</priority>****
>
>                      <bandwidth>32</bandwidth>****
>
>                      <bandwidthtype>Kb</bandwidthtype>****
>
>                      <enabled>on</enabled>****
>
>                      <ecn>on</ecn>****
>
>                      <realtime3>240Kb</realtime3>****
>
>                      <realtime>on</realtime>****
>
>                 </queue>****
>
>            </queue>****
>
>      </shaper>****
>
> ** **
>
> ** **
>
> ****
>
> ** **
>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>



-- 
======================
Tony Graziano, Manager
Telephone: 434.984.8430
sip: [email protected]
Fax: 434.465.6833

Email: [email protected]

LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: [email protected]

Helpdesk Contract Customers:
http://support.myitdepartment.net

<http://support.myitdepartment.net>Blog:
http://blog.myitdepartment.net

Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4

Ask about our Internet faxservices!

<<image001.jpg>>

_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Reply via email to